ExtremeCloud IQ Controller v10.11.01 User Guide

To view network details from the AP screen:

From the left pane, select Monitor > Devices > Access Points.
The Access Points list opens.
Select an AP.
The network details for the selected AP display.

If the AP is configured on a mapped floor plan, a map displays showing the AP location with all associated clients. Select the map to open the floor plan view.

If there is no map, the Topology diagram displays.
You can also:Select to modify configuration settings. Select to go back to the list.

AP Details

The following details are available for each AP. Details may differ based on the AP model.

Select the status type tab to display the corresponding status page:

IOT — Indicates the Internet of Things (IOT) configuration information:

Depending on the Application type, the Configuration field displays information relevant to the Application:

Table 1. IOT Application and Configuration information
Application	Configuration
iBeacon Scan	UDP Server, ADSP Server, Positioning Server
iBeacon	Major, Minor and UUID
Eddystone-url Beacon	URL
Eddystone-url Scan	UDP Server, ADSP Server, Positioning Server
Generic Scan	UDP Server, ADSP Server, Positioning Server
OFF (AP supports IOT, but IOT the profile is not assigned)	-
NA (AP does not support IOT)	-

ESL — Indicates the connection status for each Electronic Shelf Label (ESL) type:
- Type — The name of the ESL type
- Server — Server path
- Device — Connected device

Table 2. Tabs on the AP Details Screen
Tab	Description
Dashboard	Network charts provide client count and radio channel data. Use this information to determine network traffic associated with the AP and channel statistics.
Sites	Sites that include this AP. Click the site to show details.
Networks	List of network services associated with the device. Click a network to show network details.
VLANs	Details about AP Tunnel status for the selected AP and VXLAN information related to MTU packet size. For more information, see AP Tunnel Information. Note: Supported on Wi-Fi 6 AP models.
Roles	List of Roles associated with the device group, of which this device is a member.
Clients	List of clients associated with the AP. Add or remove clients from Allow and Deny lists.
Troubleshooting	Offers packet capture at the AP, remote console access to the AP, and Smart Poll reporting.
Smart RF	View widgets that show information about the following: Mitigation Occupancy and neighbor channels Peer AP visibility. Events View the Events table for these Smart RF Event details: Time Type AP Name Serial Number Select + to expand the event and view details.
Certificate	Current credentials in use by the AP.
AP Events	AP Event Report that offers various historical information about AP events.