ExtremeIQ Cloud

Navigation

Navigate using the tab icons. Hover over an icon to see the name of the tab.

Configure > Network Policies > policy_name > Router Settings > Device Template

About Router Templates

A router template is a diagram of the physical ports for a specific Extreme Networks router model and allows you to assign port types to the device ports. A port type defines how the ports assigned to it will function.

For information about AP templates, see Device Templates,AP Device Template Settings and Configure Device Template Classification By Location.

For information about switch templates, see Configure Switch Templates and Configure Device Template Classification By Location.

Add , Modify, Clone, or Delete Router Templates

You can add one or more templates for the router models to which the network policy applies. To use more than one template for the same router model, you must use classification rules to distinguish which template to apply to which device.

You can select a previously defined template to use as is or copy it and modify the settings in the copy to customize it for a particular policy. When you modify a device template that is used in multiple network policies, your changes are applied to that template everywhere. If you do not want to change the template in other network policies, make a copy, save it with a different name, and modify the new template for use in a single policy.

The router table displays the following information:

Device Model: The name of the router model.

Template: The name of the router template. Select the name to see the Template Configuration page.

Classification Rules: The name of the rule that ExtremeCloud IQ uses to apply one of several templates for the same model to physical devices. Select the rule name to see the Classification Rule page.

Assignment Description: The type and value of the classification rule used to apply the template.

There are two ways to delete device templates from this page:

To delete a template from the network policy but keep it in the ExtremeCloud IQ store of configuration objects for use in other network policies, select the check box of a device template and then select Delete icon above the table on the Router template page.

To delete a template both from the current network policy and from your ExtremeCloud IQ account, select Select icon , select Delete icon in the Device Template dialog box, and then select Yes at the confirmation prompt.