Displays the consolidated list of PIM neighbors (specific to the VR).
| ipv4 | Displays PIM IPv4 configuration information. |
| ipv6 | Displays PIM IPv6 configuration information. |
| neighbor | Displays PIM neighbor. |
IPv4 is the default for the show pim {ipv4 | ipv6} neighbor command.
The following command displays the PIM neighbor information:
# show pim neighbor Neighbor IP Gen Id Interface DR Flags Expires --------------- ---------- --------------- --------------- ----- ------- 11.1.1.1 0x68a75814 transfer1 11.1.1.3 RB 83
The following command displays the PIM neighbor IPv6 information:
# show pim ipv6 neighbor
Neighbor IP Gen Id Flags Expires
Interface Designated Router
------------------------------------------------------------------------
fe80::204:96ff:feed:dc00 0x68a75814 RB 83
transfer1 fe80::204:96ff:feef:3400
This command was first available in version 33.5.1.
This command is available on platforms that support the appropriate license. For complete information about software licensing, including how to obtain and upgrade your license and which licenses support the PIM feature, see the ExtremeXOS v33.2.1 Licensing Guide document.