PTP Profile Configuration Enhancement

Version 33.6.1 adds support for specifying a PTP profile when creating a PTP domain. This simplifies configuration by automatically applying profile-specific default timing intervals.

Behavior:

When a profile is specified during domain creation, VLANs subsequently added to the PTP domain automatically inherit the profile's default timing intervals (sync interval, delay request interval, and announce interval) rather than system defaults. This eliminates the need for manual configuration of these parameters per VLAN.

Modified CLI Command

The following command adds the following supported profiles using keywords:

Supported Profiles:

aes67-2018 - AES67-2018 profile (domain 0)
g8275.1 - G.8275.1 profile (domain 24)
g8275.2 - G.8275.2 profile (domain 44)
g8265.1 - G.8265.1 profile (domain 1)
st-2059-2 - ST-2059-2 profile (domain 127)

The show network-clock ptp command now displays the configured PTP profile.

Example:

show network-clock ptp boundary
Mode        :  Boundary Clock
Profile     :  st-2059-2
State       :  Enabled
...

To change the profile of an existing PTP domain, the domain must be deleted and recreated with the new profile.

Supported Platforms

7520 and 7720 platforms.