Display information about Dynamic Host Configuration Protocol (DHCP) relay forward paths.
show ip dhcp-relay fwd-path
show ip dhcp-relay fwd-path [vrf WORD<1-16>]
show ip dhcp-relay fwd-path [vrf WORD<1-16>] [vrfids WORD<0-512>]
show ip dhcp-relay fwd-path [vrfids WORD<0-512>]
None.
User EXEC
The show ip dhcp-relay fwd-path command displays the following information:
Output field |
Description |
---|---|
INTERFACE |
Shows the VLAN or port associated with the respective relay interface. |
SERVER |
Specifies the server address. |
ENABLE |
Specifies if the DHCP-relay forwarding path from the client to the server is enabled on the switch. |
MODE |
Indicates the configured mode of this interface. |