LED Indicators

AP-8163 Access Points have LED activity indicators on the front of the enclosure. The LEDs provide a status display indicating error conditions, transmission, and network activity for the 2.4 GHz radio (green) and the 5 GHz radio (amber).

AP-8163 LED Indicators

Task	2.4 GHz Activity LED (Green)	5 GHz Activity LED (Amber)
Unconfigured Radio	On	On
Normal Operation	If this radio band is enabled: Blink at 5 second interval If this radio band is disabled: Off If there is activity on this band: Blink interval at 1 time per second	If this radio band is enabled: Blink at 5 second interval If this radio band is disabled: Off If there is activity on this band: Blink interval at 1 time per second
Firmware Update	Off	On
Locate AP Mode	LEDs blink in an alternating green, red and amber pattern using an irregular blink rate. This LED state in no way resembles normal operating conditions.	LEDs blink in an alternating green, red and amber pattern using an irregular blink rate. This LED state in no way resembles normal operating conditions.

Published June 2017prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback