Basic Configuration Using the Management Interface

Once the NX 9600 series controller hardware is installed and powered on, complete the following to access the Management Interface functions:

1. Connect one end of an Ethernet cable to one of the ports on the back of the NX-9600 series controller, and connect the other end to a computer with a working Web browser.
2. Set the computer to use an IP address between 192.168.0.10 and 192.168.0.254 on the connected port. Set a subnet /network mask of 255.255.255.0.
3. Once the computer has an IP address, point the Web browser to: https://192.168.0.1. The following login screen displays:
   

   Management Interface Login Screen
4. Enter the default username admin in the Username field.
5. 5. Enter the default password admin123 in the Password field.
6. Click Login. You are prompted to change your password.
   

   Change Password Screen
7. Enter a new password, then enter it again to confirm it.
8. Click Apply. The password change is confirmed.
   

   Password Change Confirmation
9. Click OK. The NX-9600 Dashboard displays.
   

   NX-9600 Dashboard Screen

You have now established a connection to the NX-9600 Management Interface.