Details about access point installation on a standard ceiling
The access point ships with the AH-ACC-BKT-AX-TB mounting bracket for standard 15/16 in. dropped ceiling grid or for 9/16 in. wide and flat T-bar, and for walls or solid surfaces with the appropriate mounting hardware. For wall or solid surface installation using the AH-ACC-BKT-AX-TB bracket, see Install the Access Point on a Wall or a Solid Surface Using the AH-ACC-BKT-AX-TB Bracket.
For non-standard ceiling rail installations, see Install the Access Point on a Non-Standard Ceiling Grid or a Wall.
The bracket and the access point have a red dot on the back that acts as a guide during installation.
To install the access point:
| Callout | Description |
|---|---|
| 1 | Metal angled cuts |
| 2 | Wall mount holes |
| 3 | White tab |
Note
There are two white tabs in the back of the bracket that holds on to the ceiling rail in place. Use your finger to push and unhook one side of the white tab if you want to remove the accessory from the ceiling rail.Note
The bracket has a center circular tip that fits into the circular dip on the back of the access point.