L3 Service Switch Configuration

The following table shows an example of the switch configuration on the leaf nodes.

Table 1. L3 Service switch configuration
EPG	Switch Configuration	Comments
89cbf489-f3d9-41c7-bbb2-6cb7df33da02 (GREEN_NETWORK) Endpoint: eth 0/1 on Leaf-1 EndPoint: eth 0/1 on Leaf-2 CTAG 30 AnyCast 10.0.0.1 VRF R1	vlan 30 description L2 Tenant vlan !	VLAN 30 configured on Leaf-1 and Leaf-4
	evpn default vlan add 30 !	VLAN 30 added to evpn Note: VLAN to VNI mapping is set to auto as part of fabric setup.
	interface Ve 30 vrf forwarding 99cbf489f3d941c7bbb26cb7df33da03 ip anycast-address 10.0.0.1 no shutdown !	Anycast IP address is provisioned as the Gateway IP address on the Interface Ve 30 (GREEN_Network)
	interface ethernet 0/1 switchport switchport trunk allowed vlan add 30 no shutdown !	Interface configurations on both the switches, Leaf-1 and Leaf-4.
89cbf489-f3d9-41c7-bbb2-6cb7df33da02 (GREEN_NETWORK) Endpoint: eth 0/1 on Leaf-1 EndPoint: eth 0/1 on Leaf-2 CTAG 30 AnyCast 10.0.0.1 VRF R1	vlan 40 description L2 Tenant vlan router-interface Ve 40 !	VLAN 40 configured on Leaf-1 & Leaf-4
	evpn default vlan add 40 !	VLAN 40 added to evpn. Note: VLAN to VNI mapping is set to auto as part of fabric setup.
	interface Ve 40 vrf forwarding 99cbf489f3d941c7bbb26cb7df33da03 ip anycast-address 9.0.0.1 no shutdown !	Anycast IP address is provisioned as the Gateway IP address on the Interface Ve 40 (RED_Network).
	interface ethernet 0/1 switchport switchport trunk allowed vlan add 40 no shutdown !	Interface configurations on both the switches Leaf-1 and Leaf-4.