efa tenant po create

Creates a port channel for a tenant.

Syntax

efa tenant po create [ --name po-name| --tenant tenant-name| --speed speed| --negotiation active | passive | static | --port port-info| --number |--lacp-timeout long | short | --min-link-count num-links|--description description|--help]

Parameters

--name po-name
Specifies the port channel name.
--tenant tenant-name
Specifies the tenant name.
--speed speed
Configures the speed for the port channel and its member ports. Valid values are 100Mbps, 1Gbps, 10Gbps, 25Gbps, 40Gbps, and 100Gbps.
--negotiation active | passive | static
Configures LACP Negotiation mode for a port channel. Valid values are active, passive, and static.
--port
Specifies the device IP address and Ethernet port details. Example: SW1_IP[0/1],SW2_IP[0/5]
--number port-info
Specifies the port channel interface number generated by the service.
--lacp-timeout long | short
Specifies the length of the timeout. Valid values are short and long.
--min-link-count num-links
Specifies the least number of links that need to be operationally up to declare the port channel as operationally up. The default value is 1. Valid values are 1 through 64.
--description description
Describes the port channel.
--help
Displays help for the command.

Examples

This example creates a dual-homed PO.
(efa:extreme)extreme@node-1:~$ efa tenant po create --tenant tenant11 --name po1 
--speed 100Gbps --negotiation active  --lacp-timeout short --port 10.20.216.15[0/12-13],
10.20.216.16[0/12-13] 
--min-link-count 2

PortChannel created successfully.
This example creates a single-homed PO.
((efa:extreme)extreme@node-1:~$ efa tenant po create --tenant "tenant11" --name "po2" 
--speed 10Gbps --negotiation static  --port 10.20.216.15[0/15] --min-link-count 1 
--description po2

PortChannel created successfully.

--- Time Elapsed: 3.894884521s ---