Create a Multi Segment Virtio VM, PFPT, and VFPT Network

You can create default physnet and segments for PFPT_LAG and VFPT_L.

Perform this procedure to create default physnet and segments for PFPT_LAG and VFPT_L. There are Virtual Machine created on all of these segments. The network also gets extended on DC EDGE using segments.

The following figure shows an overview of Virtio VM, PFPT, and VFPT segment network with DC Edge.

Click to expand in new window
Overview of Virtio VM, PFPT, and VFPT segment network with DC Edge
Table 1.
Command EFA Impact
openstack network create --provider-network-type vlan --provider-physical-network VFPT_L --provider-segment 3710 ms10Network1

EPG Created for ms10Network1

Name = 74cbf489-f3d9-41c7-bbb2-6cb7df33da6d

CTAG = 3710

Note - 74cbf489-f3d9-41c7-bbb2-6cb7df33da6d

Is the neutron UUID allocated for the EPG

Port = L4[0/2] added

openstack network segment create --network-type vlan --physical-network EXT1 --segment 3710 --network ms10Network1 ms10Network1DcgwSegment

Endpoint corresponding EXT1 added to EPG(ms10Network1) VLAN Provisioned

EPG Updated

Name = 74cbf489-f3d9-41c7-bbb2-6cb7df33da6d

Port = L4[0/2] , lag_4 (added)

openstack network segment create --network-type vlan --physical-network PFPT_LAG --segment 3710 --network ms10Network1 ms10NetworkPFPTSegment

Endpoint corresponding EXT1 added to EPG(ms10Network1) VLAN Provisioned

EPG Updated

Name = 74cbf489-f3d9-41c7-bbb2-6cb7df33da6d Port = L4[0/2] , lag_4 , lag_2 (added)

openstack network segment create --network-type vlan --physical-network default --segment 3710 --network ms10Network1 ms10Network1DefaultSegment

openstack subnet create ms10subnet1 --network ms10Network1 --subnet-range 130.1.1.0/24

openstack subnet create ms10subnet1ipv6 --network ms10Network1 --ip-version 6 --ipv6-address-mode=dhcpv6-stateful --subnet-range fd00:0130:0:57::1000/64

openstack port create ms10VirtIoPort1 --network ms10Network1 --vnic-type normal

openstack port create ms10SriovPort2 --network ms10Network1 --vnic-type direct

openstack port create ms10PFPTport3 --network ms10Network1 --vnic-type direct-physical

openstack server create --flavor myhuge --image ubuntu --port $(neutron port-list | grep -w 'ms10VirtIoPort1' | awk '{print $2}') ms10VirtIoVM1 --availability-zone nova:compute-0-5.domain.tld

Endpoint corresponding default added to EPG(ms10Network1) VLAN Provisioned

EPG Updated

Name = 74cbf489-f3d9-41c7-bbb2-6cb7df33da6d

Port = L4[0/2],lag_4,lag_2 (added)

openstack server create --flavor myhuge --image ubuntu --port $(neutron port-list | grep -w 'ms10SriovPort2' | awk '{print $2}') ms10SrIovVM2 --availability-zone nova:compute-0-1.domain.tld

openstack server create --flavor myhuge --image ubuntu --port $(neutron port-list | grep -w 'ms10PFPTport3' | awk '{print $2}') ms10PFPTVM3 --availability-zone nova:compute-0-7.domain.tld