efa tenant service mirror session create

Creates a mirror session for a specified tenant.

Syntax

Parameters

-name session-name: Specifies the name of the mirror service session.
--tenant tenant-name: Specifies the name of the mirror source tenant.
--description stringArray: Specifies the description of the mirror service session.
--source stringArray: Specifies the mirror source, in the following format: deviceIP, IfType, IfName. Valid values of IfType are eth | po | vlan. Global Vlan Source format: vlan, vlan-range. Vlan Range Source format: vlan,a-b,c,d,e-f,g.
Example : 10.20.20.1,eth,0/1 10.20.20.1,po,po1 10.20.20.1,vlan,100 vlan,100 vlan,100-110,115,120-130.
A maximum of 253 characters are allowed for the Vlan Range.
--type stringArray: Specifies the mirror type in the following format: sourceDeviceIP, sourceIfType, sourceIfName:Value
Example: 10.20.20.1,eth,0/1:port-based 10.20.20.1,po,po1:flow-based. Default is port-based. Valid values are port-based | flow-based.
--destination-type stringArray: Specifies the mirror destination type in the following format: sourceDeviceIP, sourceIfType, sourceIfName:value
Example:10.20.20.1,eth,0/1:span. Valid Values are span.
--destination string: Specifies the mirror destination in the following format: sourceDeviceIP, sourceIfType,sourceIfName:destinationDeviceIP, destinationIfType, destinationIfName
Example: 10.20.20.1,eth,0/1:10.20.20.1,eth,0/5 10.20.20.1,vlan,100:10.20.20.1,eth,0/6 vlan,100:10.20.20.1,eth,0/6
--direction stringArray: Specifies the mirror traffic direction in the following format: sourceDeviceIP, sourceIfType, sourceIfName:Value
Example: 10.20.20.1,eth,0/1:tx. Valid values are tx | rx | both.

Examples

This example demonstrates the configuration to enable traffic mirroring with the following features:

Out-of-band mirroring
Port-based mirroring
Multi tenancy

(1) For the IP: 10.20.246.15.

efa tenant service mirror session create –name ten1mirrorsession1 
--tenant ten1--source-if-type port-channel--source-if-name 10.20.246.15,ten1po1 
--destination-if-type eth--destination-if-name 10.20.246.15,0/31 
--direction both--type port-based

and

efa tenant service mirror session create –name ten2mirrorsession1 
--tenant ten2--source-if-type port-channel--source-if-name 10.20.246.15,ten2po1 
--destination-if-type eth--destination-if-name 10.20.246.15,0/31 
--direction both--type port-based

(2) For the IP: 10.20.246.16

efa tenant service mirror session create –name ten1mirrorsession2 
--tenant ten1--source-if-type port-channel--source-if-name 10.20.246.16,ten1po1 
--destination-if-type eth--destination-if-name 10.20.246.16,0/31 
--direction both--type port-based

and

efa tenant service mirror session create –name ten2mirrorsession2 
--tenant ten2--source-if-type port-channel--source-if-name 10.20.246.16,ten2po1 
--destination-if-type eth--destination-if-name 10.20.246.16,0/31 
--direction both--type port-based