show inline-power configuration ports

show inline-power configuration ports {port_list}

Description

Displays inline power configuration information for the specified ports.

Syntax Description


`port_list`	Specifies one or more ports. If you do not specify ports, information for all ports appears.

Default

N/A.

Usage Guidelines

The output displays the following inline power configuration information for the specified ports:

Config—Indicates whether the port is enabled to provide inline power:
- Enabled: The port can provide inline power.
- Disabled: The port cannot provide inline power.
Operator Limit—Displays the configured limit, in milliwatts, for inline power on the port.
Label—Displays a text string, if any, associated with the port.

Example

The following command displays inline power configuration information for ports 1 to 6:

# show inline-power configuration ports 1-6
 
Port   Config    Operator   Priority   Detection                    Fast   Label
                 Limit
1      Enabled   90000 mW   Low        802.3af-only                 Y
2      Enabled   90000 mW   Low        802.3af-only                 Y
3      Enabled   90000 mW   Low        802.3af-only                 Y
4      Enabled   90000 mW   Low        802.3af-only                 Y
5      Enabled   90000 mW   Low        802.3af-only                 N
6      Enabled   90000 mW   Low        802.3af-only                 N

History

This command was first available in ExtremeXOS 11.1.

Per-port Fast PoE information was added in ExtremeXOS 31.1.

Platform Availability

This command is available on the PoE devices listed in Extreme Networks PoE Devices.