show interface port-channel

Displays the port-channel information.

Syntax

show interface port-channel [ channel-number | brief

Parameters

port-channel channel-number: Specifies the port channel number. The range is 1-255.
brief: Displays brief information of the port channel interface.

Modes

Exec mode

Usage Guidelines

This command is available only to users with admin role.

Examples

The following example shows interface port channel information.

device# show interface port-channel 1
port-channel 1 is up 
    MTU 9216 Bytes 
    IfIndex 0x40000201 
    Port mode is Full Duplex, 100 Gb/s 
    LagType is Static 
    MinLinks is 1 
    Load balance method uses Src/Dst IP, Src/Dst L4 port and 
      protocol 
    Active Members in this channel: Eth 1/1 
    Members in this channel: Eth 1/1 
 
Statistics 
 Carrier Transitions: 3 
           LastClear: 37m48.716951005s 
Input: 
          Broadcast Pkts: 0 
            Discard Pkts: 0 
             Errors Pkts: 0 
              FCS Errors: 0 
              MCast Pkts: 0 
                  Octets: 0 
              UCast Pkts: 0 
       Unknown Protocols: 0 
Out: 
          Broadcast Pkts: 0 
            Discard Pkts: 0 
             Errors Pkts: 0 
              MCast Pkts: 0 
                  Octets: 0 
              UCast Pkts: 0

The following example shows brief of the port channel interface.

NPB# show interface port-channel brief 

Number of interfaces 24 
Port    Mtu     Admin-State   Oper-State  Ifindex         Description 
----------------------------------------------------------------------------------------- 
Po1     9216    UP            DOWN        0x40000200    Port-Channel Interface 
Po10    9216    UP            DOWN        0x40000209    Port-Channel Interface 
Po200   9216    DOWN          DOWN        0x400002c7    Port-Channel Interface 
Po255   9216    UP            UP          0x400002fe    Port-Channel Interface