show system logging service

Displays severity level for a specified or all services.

Syntax

show system logging service [chassis-ms | ifmgr-ms | mgmt-security | mgmt-snmp-agent | mgmtsvc-apigw | pktmgr-ms ] ]

Parameters

chassis-ms
Specifies chassis service.
ifmgr-ms
Specifies interface manager service.
mgmt-security
Specifies security service.
mgmt-snmp-agent
Specifies SNMP agent service.
mgmtsvc-apigw
Specifies API gateway service.
pktmgr-ms
Specifies packet manager service.

Modes

Exec mode

Usage Guidelines

You can run this command without specifying a name to display configuration information for all.

Examples

The following example shows the configured logging severity for all services.

device(config)#show system logging service 
Service                   Severity 
========================= ======== 
chassis-ms                ERROR 
ifmgr-ms                  DEBUG 
mgmt-security             DEBUG 
mgmt-snmp-agent           DEBUG 
mgmtsvc-apigw             DEBUG 
pktmgr-ms                 DEBUG