Modify TACACS+ Server Configuration

Before you begin

Only admin users can perform this procedure.

About this task

Perform this procedure modify the client-side TACACS+ server configuration.

Procedure

Display the configured server IP addresses.

device# show running-config tacacs-server tacacs-server host 10.2.3.5 encrypted-key "jahasjikjdoaskjuihuhiaoljsiaknkaiua="

# tacacs-server host 1.2.3.4 encrypted-key JMeYDVdBN4Vb-wx35d7HnXIE8BL9KLUcEcePFwMNGo

Enter the Config mode.
```
device(config)# 
```

Enter TACACS+ server configuration mode.

device(config)# tacacs-server host 10.2.3.5
device(config-tacacs-config)#

Modify the required the parameters.
- host
- plain-key
- encrypted-key
```
device(config-tacacs-config)# plain-key "changedsec"
```

Return to the Exec mode and verify the configuration.

device(config-tacacs-config)# end
device# show running-config tacacs-server tacacs-server host 10.2.3.5 encrypted-key "jahasjikjdoaskjuihuhiaoljsiaknkaiua="