Resolved Issues in ExtremeXOS 30.2

The following issues were resolved in ExtremeXOS 30.2. ExtremeXOS 30.2 includes all fixes up to and including ExtremeXOS 11.6.5.3, and earlier, ExtremeXOS 12.0.5, ExtremeXOS 12.1.7, ExtremeXOS 12.2.2-patch1-12, ExtremeXOS 12.3.6, ExtremeXOS 12.4.5, ExtremeXOS 12.5.5, ExtremeXOS 12.6.3, ExtremeXOS 12.6.5, ExtremeXOS 12.7.1, ExtremeXOS 15.1.5, ExtremeXOS 15.2.4, ExtremeXOS 15.3.3, ExtremeXOS 15.4.1, ExtremeXOS 15.5.1, ExtremeXOS 15.5.2, ExtremeXOS 15.6.1, ExtremeXOS 15.6.2, ExtremeXOS 15.7.1, ExtremeXOS 16.1, ExtremeXOS 16.1.2, ExtremeXOS 16.1.3, ExtremeXOS 21.1, ExtremeXOS 22.1, ExtremeXOS 22.2, ExtremeXOS 22.3, ExtremeXOS 22.4, ExtremeXOS 22.5, ExtremeXOS 22.6, and ExtremeXOS 30.1. For information about those fixes, see the release notes for the specific release.

Resolved Issues, Platform-Specific, and Feature Change Requests (CRs) in 30.2

CR Number	Description
General
xos0072176	DNS resolves on wrong VR.
xos0072332	VLANs appear in different, as opposed to alphabetically by name, order in the output from show configuration command.
xos0072343	Switch model names are inconsistent between commands, SNMP, and documentation.
xos0073425	On Summit X670-G2 stacks, with LTEP IP unconfigured, disabling, and then enabling LLDP ports produces the following error: <Erro:HAL.VXLAN.VLANNotFnd> Slot-2: Vlan with instance 1000008 is not found. 06:07:40.66 <Erro:HAL.VXLAN.VLANNotFnd> Slot-2: Vlan with instance 1000008 is not found.
xos0073804	The process rtmgr ends unexpectedly with signal 11 after changing the gateway of L3VPN routes.
xos0074303	NTP restricted list configuration is not reflected in the output of the "show configuration" command causing configuration to be lost on reboot, and NTP restrict entry not being removed when deleted.
xos0074338	After PIM-SM failover, the second convergence occurs, resulting in minor traffic loss.
xos0074308	Image download fails if the URL size limit is greater than 128 characters.
xos0074672	Unable to connect a new switch to the ExtremeCloud due to a SSL certificate exchange error.
xos0074898	MAC address is not updated properly in the hardware after stack failover.
ExtremeSwitching X590 Series Switches
xos0074378	The process PoE stops responding on the controlling bridge (CB) when polling the PoE configuration periodically from ExtremeManagement (cloud connector).
ExtremeSwitching X690 Series Switches
xos0072871	When 2,000 interfaces are created on a switch and continuous IPv4 traffic is sent through all the interfaces, a few FDB entries may not be re-learned, if the following commands are executed twice without waiting for all the entries to be re-learned : restart port port-number disable port port-number
xos0072875	After enabling sharing on a port that does not support 100G, an error appears after executing configure ports all partition 1x100G.
xos0073818	Packets originating in a switch fail to egress after removing the ports from service VLAN.
xos0074345	DNS proxy should only bind to loopback address.
xos0074374	ExtremeXOS does not support port VLAN monitoring on PSTAG ports.
xos0074587	EHOP table is leaking when port flaps on the switch.
ExtremeSwitching X870 Series Switches
xos0073880	In policy, redirect-port-list action modifier does not work properly for LAG ports.
ACL
xos0074344	ACL process signal 5 appears when changing active l2pt profile on ports.
ARP
xos0071708	Refresh option for clear iparp and clear neighbor-discovery commands does not work correctly. All entries are cleared.
xos0073372	For ExtremeSwitching X465, X590, X690, and X870 series switches, ARP learning time, with greater than 17,000 entries and random IPs, is increased in ExtremeXOS 30.1 compared to 22.5.
FDB
xos0073139	When user-configured ACLS are applied on limit learning ports, packets are leaked.
MAC Security
xos0073404	When the remote MAC Security (MACsec) connection transmits the MKPDUs for the MACsec protocol (usually 1 every 2 seconds) the ports with an LRM/MACsec Adapter count these in the "Rx No Tag Pkts" under the show macsec port port_num detail output. Though these packets are untagged, they are received on the uncontrolled port for the MACsec protocol and should not increment this controlled port drop counter. This issue is specific to MACsec-enabled ports with an LRM/MACsec Adapter only.
xos0073434	For MAC Security (MACsec)-enabled ports on an Summit X460G-2hc (ports 25–48) with include-sci enabled, if you receive MACsec encrypted packets with a bad SCI tag, the counter "Not Valid Pkts" is incremented instead of "Rx No SCI Pkts" under the show macsec port port_num detail output. Note that ports attached to an LRM/MACsec Adapter handle this properly.
xos0074419	If you set the MACsec replay-protect parameter to something other than the default value (enabled, 0 packet window) and you execute the MACsec initialize command, the MACsec HW reverts to the default value (even though CLI continues to show the non-default value as configured). Note that the default setting (enabled, 0 packet window) is the most secure setting. Therefore this defect will never make a MACsec connection less secure.
xos0074848	On SummitStacks, with or without MACsec configured, the following error may occur after reboot: <Erro:cm.sys.LoadApplCfgObjFail> "macsec" application failed to load "configureMka" configuration object: Error configuring actor priority
xos0074490	On Summit X440-G2 or X620 series switches, with MACsec enabled on a port with LRM/MACsec adapter attached, brief traffic loss may occur when secure association key (SAK) is periodically refreshed.
MLAG
xos0074039	After disabling, and then enabling the ports, traffic from one MLAG port is not egressing by the other MLAG port.
MPLS
xos0069690	VPLS LSP counters are not working after multiple disabling, and then enabling of RSVP-TE LSPs.
OSPFv2
xos0073995	Interop request: Need to avoid bringing down OSPF neighborship when neighbor is restarted gracefully.
SNMP
xos0074058	SNMPwalk to fetch user-created VRs neighbor-discovery always returns vr-Default information.
Security
xos0073997	On ExtremeSwitching X590 and X690 series switches, the Auth-Client type in RADIUS accounting packets is incorrect.
xos0074435	Netlogin Dot1x authentication fails if port has already been moved to authentication failure VLAN, and VLAN VSA for Dot1x authentication is not supplied in the RADIUS accept packet.
xos0074493	The process IDMgr ends unexpectedly with signal 11 when client logon and port flap occur at the same time, and if the client entry is already present multiple times in the IDMgr table.
xos0074567	NetLogin authenticated clients are cleared due to admin reset when MAC move occurs.
xos0074765	DHCP stops processing and relaying the DHCP Packets.
STP
xos0074195	Continuous DM error messages are logged if MLAG and STP are configured on stacks containing ONIE series switches (X870, X690).