The following are new open issues for supported features found in ExtremeXOS 31.5.
| Defect Number | Description |
|---|---|
| General | |
| EXOS-29818 | Duplicate mibIfEntry query from ports.py and vlan.py affects performance. |
| EXOS-30211 | Auto-provision causes a port to be removed from the STP "s0" domain. |
| ExtremeSwitching 5420 Series Switches | |
| EXOS-29875 | When MACsec and EAPS (Ethernet Automatic Protection Switching) are enabled on
the same port, the EAPS protocol takes approximately five seconds to converge after
the link is healed (for example: the cable is reconnected). Typical EAPS convergence
time is about 50 milliseconds. Workaround: If the longer convergence time is not acceptable, then do not enable MACsec on any 5420 EAPS links. |
| MACsec | |
| EXOS-29966 | While disabling MACSec on multiple ports, some error log messages are seen:
(CIT_31.5.0.300) 5420F-16MW-32P-4XE-EXOS.6 # 09/14/2021 10:18:19.39 <Erro:EDP.ProcPDUFail> PDU received on port 1:5 could not be processed, invalid SNAP (llcSnapType = 657d, edp_snap_id = bb00) Workaround: Disable MACSec on only one port at a time. |
| SNMP | |
| EXOS-29863 | A "Process netTools pid 1926 died with signal 6" crash is seen during silvercreek snmpv1 testsuite run in ExtremeXOS 31.5. |
| Universal Hardware | |
| EXOS-29882 | An error message is reported during rescue
following a VOSS to EXOS
conversion:ubiattach: error!: cannot attach "/dev/mtd0"
error 17 (File exists)
|
| VLAN | |
| EXOS-30104 | A CEP port cannot co-exists in a VLAN if the VLAN id and CEP cvids are same. |
| VXLAN | |
| EXOS-29976 | L2 VMAN traffic gets classified in the VxLAN Tenant VMAN. |