The following issues were resolved in ExtremeXOS 31.7.2-Patch1-64. Version 31.7.2-Patch1-64 includes all fixes up to and including the following versions: 11.6.5.3 and earlier, 12.0.5, 12.1.7, 12.2.2-patch1-12, 12.3.6, 12.4.5, 12.5.5, 12.6.3, 12.6.5, 12.7.1, 15.1.5, 15.2.4, 15.3.3, 15.4.1, 15.5.1, 15.5.2, 15.6.1, 15.6.2, 15.7.1, 16.1, 16.1.2, 16.1.3, 21.1, 22.1, 22.2, 22.3, 22.4, 22.5, 22.6, 30.1, 30.2, 30.3, 30.4, 30.5, 30.6, 30.7, 31.1, 31.2, 31.3, 31.4, 31.5, 31.6, and 31.7. For information about those fixes, see the release notes for the specific version.
Version 31.7 also includes fixes for issues found in Switch Engine 31.6. Version 31.6 was the first version of Switch Engine.
| Defect Number | Description |
|---|---|
| General | |
| CFD-9407 | Switch brings up the ports when diagnostics tests are running. |
| CFD-9930 | ACL Signal 11 crash occurs when ACL is added from a script and the process crash causes a switch restart. |
| CFD-9931 | In certain scenarios, ARP entry is not refreshed after a MAC move. |
| CFD-9984 | Switch restarts because of a kernel crash. |
| CFD-10024 | The route does not become active after executing the disable/enable bgp command. |
| CFD-10025 | ExtremeXOS is not switching the route to L3VPN prefix when the configured static route goes down. |
| CFD-10026 | PMBR floods multicast streams into VLANs without subscribers. |
| CFD-10027 | Router-discovery configurations missing after disabling/enabling VRRP instance. |
| CFD-10028 | SCP should choose vr-default as default VRs for operations, for example, download, in platforms that do not have a dedicated management port. |
| CFD-10177 | SNMP traps were not getting generated when there is an IP Security ARP violation despite the corresponding configuration being present in the switch. |
| CFD-10186 | VRRP hellos are dropped when they are forwarded over ISC. |
| CFD-10203 | Kernel oops occurs when VPLS pseudo-wire goes down. |
| CFD-10224 | FDB process crash occurs when polling fdb.ipNetToPhysicalEnt MIB. |
| EXOS-34819 | Several Extreme Networks certified optics are marked incorrectly as unsupported and also have link-related issues. |
| EXOS-34924 | NetTools.AllocRawSockFail error message displays when more VLANs are created/deleted dynamically over a period of time. |
| EXOS-35036 | EXPY process crash with signal 6 occurs. |
| EXOS-35117 | VPEX MLAG ring gets moved to severed state when excessive control packets are forwarded. |
| ExtremeSwitching X435 Series Switches | |
| CFD-10029 | ExtremeSwitching X435 switches send extremeOverheat traps despite device temperature being under the high temperature threshold. |
| ExtremeSwitching 5420 Series Switches | |
| EXOS-34746 | After a stack restart, a 25G port inserted with 10G 10301 optic transceiver goes down in Backup and Standby nodes. |
| ExtremeSwitching 5520 Series Switches | |
| CFD-10031 | Error message occurs when creating LAG with Primary and Backup node VIM ports. |
| SummitStack | |
| CFD-9922 | Image was not synced to the Standby node in the stack when copying the image by using SFTP put in the server. |
| CFD-10021 | On a stack, the Backup and Standby slot port configuration information is not returned when ExtremePortConfigTable is polled. |
| CFD-10022 | MLT session was not running after enable/disable jumbo-frames when ExtremeXOS stack is enabled with VPEX. |
| CFD-10219 | HAL process crash occurs when sending multicast packets to more than 33 BPEs, and when disabling/enabling the ports in a BPE. |
| EXOS-34968 | SNMP Mibs ifSpeed and ifHighSpeed are displayed in Gbps rather than bps for stack-ports. |