This release incorporates all fixes from prior releases, up to and including the following releases:
Issue number |
Description |
---|---|
CFD-10097 | IP addresses not reachable after upgrade to 8.10.1.0 due to ARP entries being stuck on TX-NNI. |
CFD-10165 CFD-10245 CFD-10467 |
5320 and 5420 switches can reboot randomly with high link utilization rate on MACsec-enabled links. |
CFD-10359 | rate-limit broadcast on NNI is lost after reboot. |
VOSS-29245 | Using ZTP and Auto-Sense to onboard a new switch dual-homed to a BCB layer, which has IS-IS keys preconfigured, the new switch does not receive DHCP replies from the uplink switches. |
VOSS-29454 | ARP replies are not received on a side IP interface configured between vIST peers. |
VOSS-29459 | Connectivity issues to various devices until ARP cleared for destination VLAN. |
VOSS-29470 | Routed traffic failure from wireless users after roaming from Cisco Wireless solution side to Extreme Cloud wireless side. |
VOSS-29540 | Intermittent Layer 2 VSN traffic issues can occur if you remove and recreate the same C-VLAN I-SIDs simultaneously on multiple SPBM-enabled nodes. |
VOSS-29647 | If you disable and reenable LLDP on a port with an FA interface, the FA interface is recreated but without the authentication key. |
VOSS-29684 | tTacacspTask crash when using a password with more than 127 characters. |
VOSS-29823 | DHCP Server subnet EDM procedures, in the User Guide and EDM Help, include steps to select the subnet, and then select an Extra button. The Extra button does not appear in EDM. |
VOSS-29839 | The device name for 5320-16P-4XE-DC displays as 5320-16P-4XE in CLI show command output, ExtremeCloud IQ, and ExtremeCloud IQ Site Engine. |