The following defects were closed with code changes in this release of Extreme Visibility Manager.
| Parent Defect ID: | XVM-562 | Issue ID: | XVM-562 |
|---|---|---|---|
| Severity: | S2 - High | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | During the device discovery using the CSV file upload, if any of the given parameters are wrong in the input for some entries (except the ip address), No error message is shown in the GUI. | ||
| Condition: | If the major parameters like IP Address, Device Version, User Name or Password are wrong, device discovery failure is shown on the GUI | ||
| Parent Defect ID: | XVM-1409 | Issue ID: | XVM-1409 |
|---|---|---|---|
| Severity: | S2 - High | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Sometime user notification shows a hour glass | ||
| Condition: | Observed once when portchannel is added | ||
| Parent Defect ID: | XVM-1738 | Issue ID: | XVM-1738 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | When user choses to breakout ports, the broken parts are shown at the top of the Ports config object instead at its original order | ||
| Condition: | When port breakout option is done for a port | ||
| Parent Defect ID: | XVM-1844 | Issue ID: | XVM-1844 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Device specific error message with an error code is seen while performing configuration operation due to permission issues. | ||
| Condition: | Discover a 9920 device with a user having role 'user' and perform config operation. | ||
| Parent Defect ID: | XVM-1922 | Issue ID: | XVM-1922 |
|---|---|---|---|
| Severity: | S2 - High | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | No notifications seen in UI when clear counters is executed from UI. | ||
| Condition: | In the Navigation menu select configure, right click the device panel and click Clear Counters. | ||
| Parent Defect ID: | XVM-2121 | Issue ID: | XVM-2121 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Ingress policy and Egress policy charts are not getting populated | ||
| Condition: | When the device dashboard is accessed immediately after discovery, policy charts are not displayed. | ||
| Parent Defect ID: | XVM-2128 | Issue ID: | XVM-2128 |
|---|---|---|---|
| Severity: | S2 - High | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: |
"Region Service Message Processing Timedout" message shown on UI when user tries to delete the same ACL multiple times before receiving the notification/confirmation for the first delete operation. No impact on XVM functionality. |
||
| Condition: | When user continuously clicks on delete button of Policy Match Rule to delete the same ACL without waiting for delete notification from XVM. | ||
| Parent Defect ID: | XVM-2135 | Issue ID: | XVM-2135 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Delay observed in processing of multiple devices discovery using CSV file, resulting in UI "Processing your request message will be appearing" | ||
| Condition: | Discover > 5 devices using CSV file. | ||
| Parent Defect ID: | XVM-2141 | Issue ID: | XVM-2141 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Policy and Matches cannot have the same name in XVM across the different types even if it is allowed on the device. | ||
| Condition: | The issue is seen when the same name is provided for different type of match or different policies and configuration is not allowed to apply. | ||
| Parent Defect ID: | XVM-2148 | Issue ID: | XVM-2148 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Deleting egress object with Network Operator role displays incorrect message saying "Delete Request Failed". | ||
| Condition: | When user with Network Operator role deletes egress or any config object | ||
| Parent Defect ID: | XVM-2149 | Issue ID: | XVM-2149 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Tunnel origination configuration is not reverted to previous state incase of failure notifications. | ||
| Condition: | Tunnel origination configuration rejected from device due to incorrect address. | ||
| Parent Defect ID: | XVM-2151 | Issue ID: | XVM-2151 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Adding back the same ACL match rule which was deleted using the same window fails. | ||
| Condition: | Delete and re add the same ACL match rule. | ||
| Parent Defect ID: | XVM-2160 | Issue ID: | XVM-2160 |
|---|---|---|---|
| Severity: | S2 - High | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Some times, SFMS Service gets re-initiated while trying to fetch service chains in a scaled environment. | ||
| Condition: | In scaled environment with bulk configuration. | ||
| Parent Defect ID: | XVM-2164 | Issue ID: | XVM-2164 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Device discovery fails with an error notification | ||
| Condition: | Rediscover a device that is in the error state due to incorrect DTCV and location. | ||
| Parent Defect ID: | XVM-2165 | Issue ID: | XVM-2165 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Session expiry alert is shown multiple times | ||
| Condition: | When configuration page is opened with consolidated view. | ||
| Parent Defect ID: | XVM-2180 | Issue ID: | XVM-2180 |
|---|---|---|---|
| Severity: | S2 - High | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | The ingress group dashboard chart is not populated with data. | ||
| Condition: | Reconciliation of an ingress group added through CLI after device discovery. | ||
| Parent Defect ID: | XVM-2182 | Issue ID: | XVM-2182 |
|---|---|---|---|
| Severity: | S1 - Critical | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Techsupport cannot be done from control plane VM | ||
| Parent Defect ID: | XVM-2185 | Issue ID: | XVM-2185 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | Notification is updated with a successful device discovery message even though the discovery failed. | ||
| Condition: | Rediscover a device that is in the error state with incorrect DTCV and location change. | ||
| Parent Defect ID: | XVM-2192 | Issue ID: | XVM-2192 |
|---|---|---|---|
| Severity: | S3 - Medium | ||
| Product: | XVM | Reported in Release: | XVM 6.0.0 |
| Symptom: | In installation tar file, controlplane.conf, region.conf and zone.conf , if NTP_CONF="0" , still configuring for NTP | ||
| Condition: | In installation tar file , controlplane.conf, region.conf and zone.conf , if NTP_CONF="0" , still configuring for NTP | ||