| Support type | SLX 9640 | SLX 9540 |
|---|---|---|
| LAYER 2 SWITCHING | ||
| Number of Trunk Groups supported |
Default profile - 256 groups with 64 Ports Tested: Total 60 LAG as follows:follows : 8 LAGs (1/10GbE) with breakout, 10 LAGs (1 GbE) w/o breakout, 38 LAGs (1/10GbE) w/o breakout, 2 LAGs (40GbE) 2 LAGs (100GbE) |
Default profile - 256 groups with 64 Ports Tested: Total 53 LAG as follows: 24 LAGs (1/10GbE) with breakout, 2 LAGs (1 GbE) w/o breakout, 22 LAGs (1/10GbE) w/o breakout, 2 LAGs (40GbE) 3 LAGs (100GbE) |
| Number of Ports per Trunk Group |
64 Tested: 32 (1/10GbE) |
64 Tested: 48 (1/10GbE) |
| Maximum LACP Trunk threshold |
64 |
64 |
| Maximum number of MAC Addresses per Switch |
750K |
750K |
| Jumbo Frames |
9216 bytes |
9216 bytes |
| Number of VLANs |
4096 |
4096 |
| Maximum number of Spanning-Tree instances (RSTP) |
RSTP is 1 instance only,RPVST/PVST 128, MSTP 32 |
RSTP is 1 instance only,RPVST/PVST 128, MSTP 32 |
| Maximum number of bridge domains |
4K |
4K |
| Maximum IGMPv2/v3 L3 entries |
16K |
16K |
| L2 Multicast Cache |
16K |
16K |
| IPv4 Software Multicast Cache for PIM/SM |
20K |
20K |
| IPv4 Hardware Multicast Entries | 20K | 20K |
| Maximum IGMP snooping vlans | 500 | 500 |
| Maximum IGMP snooping vlans (MCT) | 500 | 500 |
| Maximum static entry (IGMPv2) with uplink - IPv4 | 1000 | 1000 |
| Maximum static entry (IGMPv3) with uplink - IPv4 | 1000 | 1000 |
| Snoop Multicast IGMP Join rate per port | 1000 | 1000 |
| Snoop Multicast IGMP leave rate per port | 1000 | 1000 |
| IGMP Join rate (with PIM-SM) | 4000 | 4000 |
| IGMP Leave rate (with PIM-SM) | 4000 | 4000 |
| PIM SM Maximum local receivers (IGMP) | 4000 | 4000 |
| PIM SM Maximum OIF's per system | 64000 | 64000 |
| PIM SM Maximum OIFs per S,G | 128 | 128 |
| Maximum number of vlan replication per entry | 128 | 128 |
| Maximum number of multicast VRFs | 50 | 50 |
| Maximum number of IGMP groups per system | 16K | 16K |
| Maximum number of IGMP groups per interface | 128 | 128 |
| Maximum number of IGMP OIF per system | 8000 | 8000 |
| Maximum number of Mcast Prefix advertised by a RP | 250 | 250 |
| Maximum number of BSR RP per mcast domain | 56 | 56 |
| Maximum number of Static RP per system | 56 | 56 |
| Maximum number of RPset x RP per system | 56 | 56 |
| Maximum number of PIM Anycast RPs per system | 56 | 56 |
| Maximum number of Anycast RP peers per system | 8 | 8 |
| PIM Fast Hello | Min Hello : 1 Sec, Neighbor Removal : 3 Sec | Min Hello : 1 Sec, Neighbor Removal : 3 Sec |
| Multicast ECMP Paths | 32 | 32 |
| LAYER 3 FEATURES - IPv4 | ||
| Maximum number of IP interfaces per system (ipv4, ipv6) |
4090 |
4090 |
| Maximum number of Virtual Ethernet interfaces per system | 4090 | 4090 |
| Maximum number of ARP entries | 96K (Tested 98304) | 96K (Tested 98304) |
| Maximum number of ND entries | 32K | 32K |
| Maximum number of Static ARP entries | 96K (Tested 98304) | 96K (Tested 98304) |
| Maximum number of directly connected host routes (or IP Next-hops) | 2K | 2K |
| Number of possible secondary IP Addresses | 255 | 255 |
| Maximum number of Loopback interfaces | 255 | 255 |
| Maximum number of OSPF areas (Per VRF) | 200 | 200 |
| Number of OSPF routers in a single area | 200 | 200 |
| Number of OSPF adjacencies | 200 | 200 |
| Maximum Number of OSPF Routes | 100K | 100K |
| Maximum Number of Static Route Entries | 25K | 25K |
| Maximum BGP Peer-Groups | 250 | 250 |
| Maximum BGP Routes in RIB | 9M IN, 14M OUT | 9M IN, 14M OUT |
| BGP Peers (IPv4 and IPv6 concurrent) | 2400 | 2400 |
| Maximum Number of IS-IS Routes | 25K | 25K |
| Number of IS-IS adjacencies | Broadcast : 255 P2P : 1024 |
Broadcast : 255 P2P : 1024 |
| Number of IS-IS LSPs | 255 | 255 |
| Maximum Number of IPv4 Routes | 4M | 1M (with compression) |
| Maximum number of routes in hardware (IPv4 and IPv6 concurrent) |
Optiscale Profile LPM : 256K (Routes except / 23, /24 and /32) LEM : 750K (Routes with /23, /24 and /32 ) |
Default Profile : 4M IPv4 and 256K IPv6routes V4-V6 Profile : 4M IPV4, 700K IPv6 routes IPv6-route Profile : 1M IPv4, 1M IPv6 routes |
| Maximum VE per system | 4K | 4K |
| Maximum VRFs per system (BGP VRF IPv4/IPv6) | 1024 (Tested : 512) | 1024 (Tested : 512) |
| Maximum VRFs per system (OSPF VRF IPv4/IPv6) | 1024 | 1024 |
| Maximum VRFs per system (Static VRF IPv4/IPv6) | 1024 | 1024 |
| Number of ISIS routers in a level | 255 | 255 |
| ECMP Support | 64 | 64 |
| Number of VRRP/VRRPe Instances per system (IPv4, IPv6) | 1K | 1K |
| Number of VRRP instances per IP interface | 16 | 16 |
| Number of VRRP/VRRPe instances with Time Scale | 128 | 128 |
| Maximum Number of GRE Tunnels | 256 | 256 |
| Maximum IS-IS interfaces | Broadcast : 255 P2P : 1024 |
Broadcast : 255 P2P : 1024 |
| Policy Based Routing (PBR) | 64 Route maps per PBR | 64 Route maps per PBR |
| PBR Over GRE | NA | NA |
| ICMP Error Message handling | 5000 | 5000 |
| LAYER 3 FEATURES - IPv6 | ||
| Maximum Number of IPv6 Static Route Entries | 32K | 32K |
| Maximum Number of IPv6 Routes | Default Profile : 256K routes V4-V6 Profile : 700K routes IPv6-route Profile : 1M Routes |
Optiscale Profile LPM : 64K (Routes except /47 and /48) LEM : 180K (Routes with /47 and /48 ) |
| Maximum Number of OSPFv3 Routes | 64K | 64K |
| Maximum Number of OSPFv3 Interfaces | 256 | 256 |
| Maximum Number of OSPFv3 Neighbors | 256 | 256 |
| Maximum Number of OSPFv3 area | 10 | 10 |
| Maximum Number of BGPv6 Routes in the RIB | 64K | 64K |
| Maximum Number of BGPv6 Neighbors | 2400 | 2400 |
| IPv6 PBR | 200 route maps per PBR | 200 route maps per PBR |
|
BGP Flow Spec ( *MAX TCAM entries are 6K shared across all L3 user ACLS ) |
||
| Maximum Number of Local Flowspec rules alone * | 1K | 1K |
| Maximum Number of Remote Flow spec rules alone * | 1K | 1K |
| Maximum Number of Local and remote Flow spec rules together * | 1K | 1K |
| BGP large-community | ||
|
Maximum number of large-community that can be added/replaced/deleted for incoming route updates(NLRI) using set directive. |
32 | 32 |
| Maximum number of large-community standard/extended Acl type | 1024 rules per list. Max Seq # is 65535 | 1024 rules per list. Max Seq # is 65535 |
|
Maximum number of large-community ACL that can be matched in route-map |
32 | 32 |
| Maximum number of large-community attributes that be received per route update (including in bound set large community) | 64 | 64 |
| MPLS | ||
| Maximum MPLS labels | 15K | 15K |
| Maximum Label stacking depth | 3 | 3 |
| Maximum Target LDP sessions | 100 | 100 |
| Maximum ingress | 5K | 5K |
| Maximum transit LSPs | 20K cross-connects | 20K cross-connects |
| Maximum VLLs per system (with MCT) | 2600 | 2600 |
| Maximum VPLSs per system (with MCT) | 2600 | 2600 |
| Maximum endpoints per VLL per system | 8K | 8K |
| Maximum endpoints per VPLS per system (non MCT, MCT) | 20K | 20K |
| Maximum VPLSs per system (max vpls mac table) | 750K | 750K |
| Total VPLS VC labels per system | 8K | 8K |
| Maximum Routes per VRF/VPN | 256K | 256K |
| Maximum MPLS VPNs (IPv4) per system | 512 | 512 |
| Maximum MPLS VPNs (IPv6) per system | 512 | 512 |
| Maximum Adaptive LSP (ingress/egress) | 20K | 20K |
| Maximum FRR instances | 5K Facility or 2K 1-to-1 detour | 5K Facility or 2K 1-to-1 detour |
| Maximum number of VPLS LSP load balance | 16 | 16 |
| Maximum number of LDP ECMP path | 16 | 16 |
| RSVP LSP History support | Max 32 events per LSP at Ingress router | Max 32 events per LSP at Ingress router |
| Maximum number of Auto-bandwidth templates | 100 | 100 |
| Maximum number of recorded samples per Auto- | 1500 | 1500 |
| Single-hop LSP Accounting | 5K | 5K |
| Maximum number of VPLS instance with IPv4/IPv6 VE VRF support (MCT) | 2600 | 2600 |
| Maximum number of Bypass LSP per system | 512 | 512 |
| Maximum number of LDP session | 100 | 100 |
| Maximum number of LDP FEC | 5K | 5K |
| RATE LIMITING AND TRAFFIC POLICING FEATURES | ||
| Granularity | 22kbps | 22kbps |
| Number of Rate-limiters/Traffic-policers Per System | 1k/32k | 1k/32k |
| AVAILABILITY | ||
| ACL | ||
| Maximum shared IPv4 ACLs across “all ports per tower” and “per system” | Per tower- 6K IPv4 ACE CAM sharing - 10K IPv4 AC |
Per tower- 6K IPv4 ACE CAM sharing - 10K IPv4 AC |
| Maximum shared IPv6 ACLs across “all ports per tower” and “per system” | Per tower- 6K IPv4 ACE CAM sharing - 10K IPv4 ACE |
Per tower- 6K IPv4 ACE CAM sharing - 10K IPv4 ACE |
| Maximum shared L2 ACLs across “all ports per tower” and “per system” | Per tower – 2K L2 ACE CAM sharing- 2K L2 ACE |
Per tower – 2K L2 ACE CAM sharing- 2K L2 ACE |
| Named L2 ACL statements | 2k | 2k |
| Maximum number of IP receive ACLs | 200 | 200 |
| Maximum number of IPv6 receive ACLs | 50 | 50 |
| MULTI-CHASSIS TRUNKING (vLAG support) | ||
| Number of vPorts – (# of VLANs) times (# of ports) | 100k | 100k |
| Number of VLANs for logical port (single port or LAG) | 225 | 225 |
| Maximum MCT Clients | 72 (24 10G ports and 48 25G breakout ports) |
40 |
| Maximum of VLANs for ICL | Not applicable with SLX MCT design | Not applicable with SLX MCT design |
| Maximum number of L2 / unified bridging instances (VPLS/EVPN, L2, VXLAN) with MCT and BUM RL | 4k | 4k |
| Maximum number endpoint in MCT for L2/bridging (VPLS, EVPN, L2, VXLAN) | Breakdown for each endpoint types *80K AC LIFs for SLX9540 *8K PW instances total *8K total VNI (including 4K for vlan and 4K for BD) *100K for all types of services. |
Breakdown for each endpoint types *80K AC LIFs for SLX9640 *8K PW instances total *8K total VNI (including 4K for vlan and 4K for BD) *100K for all types of services. |
| Maximum number of MAC addr for MCT | 180K | 180K |
| VXLAN /IP Fabric | ||
| NVA (See Feature Tab) | ||
| Statistics | ||
| OAM | ||
| BFD min timer | 200msec (36 sessions multihop) | 200msec (36 sessions multihop) |
| 802.1ag sessions | 4000 | 4000 |
| Y.1731 SLM/DM sessions | 100 | 100 |
| EVPN-VXLAN Scaling (IP Fabric) | ||
| VxLAN Tunnel (e.g. ToR, DCI, hybrid cloud) | 512 | 512 |
| L2 VNI (Bridge Domains) | 4k | 4k |
| L3 VNI | 512 | 512 |
| Maximum # VRF | 512 | 512 |
| Layer 2 | ||
| Maximum # of VLANs | 4K | 4K |
| Maximum # of Bridge Domains | 4K | 4K |
| Maximum # of MAC entries | 168K | 168K |
| Maximum # of ARP entries | NS | NS |
| Maximum # of L2 VXLAN Tunnels within DC | 8K | 8K |
| Maximum # VNI | 256 (V4 Only) | 256 (V4 Only) |
| Layer 3 | ||
| Maximum # of BGP peers (IPv4+IPv6) | 256 (V4 only) | 256 (V4 only) |
| Maximum # of VE | 4K | 4K |
| Maximum # of VRF | 512 | 512 |
| MVRP | ||
| Maximum no. of dynamic VLANs advertised over MVRP (with/without MCT) | 2K | |
| Maximum no. of MACs on DUT on 2K dynamic VLANs (with/without MCT) | 250K | |
| SNMP | ||
| Maximum communities | 256 | 256 |
| Maximum contexts | 256 | 256 |
| Maximum community maps | 256 | 256 |
| Maximum SNMP v3 users | 10 | 10 |
| Maximum groups | 10 | 10 |
| Maximum views | 10 | 10 |
| Maximum v1/v2c trap hosts | 12 | 12 |
| Maximum v3 trap hosts | 6 | 6 |