Shutting down RSTP

Follow these steps to shut down RSTP either globally or on a specific interface.

Draft comment:
[>>>using "0/1" for 17s.1.00; please revise or condition for future releases as appropriate; also removed VLAN example as it is only for PVST/RPVST]

Enter global configuration mode.
```
device# configure terminal
```

Shut down RSTP.

Shut down STP globally and return to privileged EXEC mode.

device(config)# protocol spanning-tree rstp
device(conf-rstp)# shutdown
device(conf-rstp)# end

Shut down RSTP on a specific interface and return to privileged EXEC mode.

device(config)# interface ethernet 0/2
device(conf-if-eth-0/2)# spanning-tree shutdown
device(conf-if-eth-0/2)# end

Shut down RSTP on a specific VLAN and return to privileged EXEC mode.

device(config)# vlan 10
device(config-vlan-10)# spanning-tree shutdown
device(config-vlan-10)# end

Verify the configuration.
```
device# show spanning-tree 
device# 
```

Save the configuration.

device# copy running-config startup-config