show running-config radius-server
Displays the local device configuration for the RADIUS server from the configuration database.
Syntax
show running-config radius-server
host
{
ip-address
|
hostname
}
Parameters
-
host
- Identifies the RADIUS server by host name or IP address.
- hostname
- Specifies the host name of the RADIUS server.
- ip-address
- Specifies the IP address of the RADIUS server. IPv4 and IPv6 are supported.
Modes
Privileged EXEC mode
Examples
device# show running-config radius-server host 10.38.37.180
radius-server host 10.38.37.180
protocol pap
key changedsec
timeout 3
