Shows the current MPLS policy.
Privileged EXEC mode
MPLS is supported only on devices based on the DNX chipset family. For a list of such devices, see "Supported Hardware".
The following example shows a sample output of the command.
Router#show mpls policy
Current MPLS policy settings:
CSPF interface constraint: disabled
CSPF-Group computation-mode: disabled
CSPF computation-mode use bypass metric: disabled
CSPF computation-mode use bypass liberal: disabled
TTL propagation for MPLS label: disabled, IPVPN: disabled, IP over MPLS: enabled
Inter-AS route filtering: enabled, Intra-AS iBGP route filtering: disabled
Ingress tunnel accounting: disabled
Polling interval for MPLS LSP traffic statistics: 300 seconds
Advertise TE parameters via: OSPF
Handle IGP neighbor down event - ISIS: No OSPF: No
LSP rapid retry: enabled, maximum number of retries: no limit
LSP periodic retry time: 30 seconds
FRR backup/detour retry time: 30 seconds
Auto-bandwidth: enabled, sample-interval: 60 seconds
Maximum samples recorded per LSP: 1500
Soft preemption cleanup-timer: 30 seconds
MPLS TE Periodic Flooding Timer : 180 seconds
MPLS TE flooding thresholds
Global UP thresholds : None
Global DOWN thresholds : None
Default UP thresholds : 15 30 45 60 75 80 85 90 95 96 97 98 99 100
Default DOWN thresholds : 99 98 97 96 95 90 85 80 75 60 45 30 15