show ipv6 interface

Displays details of IPv6 interfaces.

Syntax

show ipv6 interface [ brief | ethernet slot/port | loopback loopback-port-number | port-channel number | ve ve_id ]

Parameters

brief

Displays brief interface information.

ethernet

Specifies Ethernet interface.

slot: Specifies a valid slot number. For devices that do not support line cards, specify 0.
port: Specifies a valid port number.

loopback loopback-port-number

Specifies the loopback interface. The range is from 1 to 255.

port-channel number

Specifies a port-channel.

ve ve-id

Specifies the VE ID of a virtual Ethernet (VE) interface. The range is from 1 to 4096.

Modes

Privileged EXEC mode

Interface configuration mode

Examples

The following example displays the output of the show ipv6 interface command with an Ethernet interface specified.

device# show ipv6 interface ethernet 2/25
 Ethernet 2/25 is up protocol is up
 IPv6 Address: 2025:2525:aaaa::1/64  Primary  Confirmed
 IPv6 Address: 2500:ffee:1234::12/64  Secondary  Confirmed
 IPv6 Address: 2500:ffee:1234::14/64  Secondary  Confirmed
 IPv6 Address: 2500:ffee:1234::16/64  Secondary  Confirmed
 IPv6 Address: fe80::748e:f8ff:fe09:e10d/128  Link-local  Confirmed
 IPv6 multicast groups locally joined: 
    ff02::1
    ff02::2    ff02::1:ff00:1    ff02::1:ff00:12
    ff02::1:ff00:14    ff02::1:ff00:16    ff02::1:ff09:e10d

 IPv6 MTU: 1500
 Vrf : default-vrf