get-interface-detail

Returns operational details of all the possible interfaces of the managed entity. Use this RPC to discover basic characteristics of all the interfaces in the system. Each sublayer below the internetwork layer of a network interface is considered to be an interface.

Usage

<?xml version="1.0" ?>
<hello xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
  <capabilities>
      <capability>urn:ietf:params:netconf:base:1.0</capability>
  </capabilities>
</hello>
]]>]]>

<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="95d5b8a8-dcb8-4e14-b35c-d3bb9e1e9f4a">
  <get-interface-detail xmlns="urn:brocade.com:mgmt:brocade-interface-ext"/>
</rpc>]]>]]>

<?xml version="1.0" encoding="UTF-8"?>
  <rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="95d5b8a8-dcb8-4e14-b35c-d3bb9e1e9f4a">
  <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
    <interface-type>port-channel</interface-type>
      <interface-name>9</interface-name>
      <port-mode>l3</port-mode>
      <if-name>Port-channel 9</if-name>
      <if-state>down</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (admin down)</line-protocol-state-info>
      <hardware-type>aggregate</hardware-type>
      <current-hardware-address>00:00:00:00:00:00</current-hardware-address>
      <logical-hardware-address>00:00:00:00:00:00</logical-hardware-address>
      <ifindex>671088649</ifindex>
      <mtu>9216</mtu>
      <ip-mtu>1500</ip-mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>10Gbps</configured-line-speed>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
	  <fec-mode>RC-FEC</fec-mode>
	  <ifFecCorrectedBlock>10</ifFecCorrectedBlock>
	  <ifFecUncorrectedBlock>4</ifFecUncorrectedBlock>
  </interface>
  <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/1</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/1</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:0c</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:0c</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201334784</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-auto-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
	  <fec-mode>Disabled</fec-mode>
	  <ifFecCorrectedBlock>0</ifFecCorrectedBlock>
	  <ifFecUncorrectedBlock>4</ifFecUncorrectedBlock>
  </interface>
  <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/2</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/2</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:0d</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:0d</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201342976</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-master-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
	  <fec-mode>Disabled</fec-mode>
	  <ifFecCorrectedBlock>0</ifFecCorrectedBlock>
	  <ifFecUncorrectedBlock>4</ifFecUncorrectedBlock>
    </interface>
    <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/3</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/3</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:0e</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:0e</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201351168</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-master-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
	  <fec-mode>Disabled</fec-mode>
	  <ifFecCorrectedBlock>0</ifFecCorrectedBlock>
	  <ifFecUncorrectedBlock>4</ifFecUncorrectedBlock>
    </interface>
    <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/4</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/4</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:0f</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:0f</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201359360</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-master-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
	  <fec-mode>Disabled</fec-mode>
	  <ifFecCorrectedBlock>0</ifFecCorrectedBlock>
	  <ifFecUncorrectedBlock>4</ifFecUncorrectedBlock>
    </interface>
    <interface xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>
      <interface-type>ethernet</interface-type>
      <interface-name>0/5</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/5</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:10</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:10</logical-hardware-address>
      <media-type>fixed</media-type>
      <wavelength>0</wavelength>
      <ifindex>201367552</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>1000-master-full-duplex</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
	  <fec-mode>Disabled</fec-mode>
	  <ifFecCorrectedBlock>0</ifFecCorrectedBlock>
	  <ifFecUncorrectedBlock>4</ifFecUncorrectedBlock>
    </interface>

    <-- Other interfaces -->

    <interface-name>0/54</interface-name>
      <port-role>edge</port-role>
      <port-mode>unknown</port-mode>
      <if-name>Ethernet 0/54</if-name>
      <if-state>up</if-state>
      <line-protocol-state>down</line-protocol-state>
      <line-protocol-state-info> (link protocol down)</line-protocol-state-info>
      <hardware-type>ethernet</hardware-type>
      <current-hardware-address>f0:64:26:f2:c4:41</current-hardware-address>
      <logical-hardware-address>f0:64:26:f2:c4:41</logical-hardware-address>
      <ifindex>201769216</ifindex>
      <mtu>9216</mtu>
      <actual-line-speed>nil</actual-line-speed>
      <configured-line-speed>100Gbps</configured-line-speed>
      <line-duplex-state>full</line-duplex-state>
      <bfd-software-session>false</bfd-software-session>
      <queuing-strategy>fifo</queuing-strategy>
      <ifHCInOctets>0</ifHCInOctets>
      <ifHCInUcastPkts>0</ifHCInUcastPkts>
      <ifHCInMulticastPkts>0</ifHCInMulticastPkts>
      <ifHCInBroadcastPkts>0</ifHCInBroadcastPkts>
      <ifHCInErrors>0</ifHCInErrors>
      <ifHCOutOctets>0</ifHCOutOctets>
      <ifHCOutUcastPkts>0</ifHCOutUcastPkts>
      <ifHCOutMulticastPkts>0</ifHCOutMulticastPkts>
      <ifHCOutBroadcastPkts>0</ifHCOutBroadcastPkts>
      <ifHCOutErrors>0</ifHCOutErrors>
	  <fec-mode>Disabled</fec-mode>
	  <ifFecCorrectedBlock>0</ifFecCorrectedBlock>
	  <ifFecUncorrectedBlock>4</ifFecUncorrectedBlock>
    </interface>
    <has-more xmlns='urn:brocade.com:mgmt:brocade-interface-ext'>false</has-more>
</rpc-reply>]]>]]>

Parameters

interface-type: Specifies the interface type.
interface-name: Specifies the nterface name.
port-role: Displays the current role that the particular interface is playing. This is applicable only for physical interfaces.
port-mode: Displays the operational mode of the particular interface. This is applicable only for physical interfaces or port-channel interfaces.
if-name: Displays the interface display name as in MIB-II's ifTable. However interface-name and interface-type values of this instance forms fully qualified name for this interface.
if-state: Displays the current operational state of this interface.
line-protocol-state: Displays the 'Line protocol' state of the interface.
line-protocol-state-info: Displays thwe reason for the current line protocol state of the interface.
hardware-type: Dispalys the hardware type
current-hardware-address: Displays the address of the interface at its protocol sub-layer.
logical-hardware-address: Displays the address of the interface at its protocol sub-layer.
ifindex: Displays a unique value, greater than zero, for each interface.
mtu: Displays the IP MTU value of the interface.
actual-line-speed: Displays the actual line speed of this interface.
configured-line-speed: Displays the administratively configured line speed of the interface.
line-duplex-state: Displays the 'Line duplex state' of the interface.
flow-control: Displays the 'Flow control' for the interface.
queuing-strategy: Displays the 'Queuing strategy' for the interface.
ifHCInOctets: Displays the total number of octets received on the interface, including framing characters.
ifHCInUcastPkts: Displays the The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer.
ifHCInMulticastPkts: Displays The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at the sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses.
ifHCInBroadcastPkts: Displays the The number of packets, delivered by the sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at the sub-layer.
ifHCInErrors: For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-oriented or fixed-length interfaces, the number of inbound transmission units that contained errors preventing them from being deliverable to a higher-layer protocol.
ifHCOutOctets: Displays the total number of octets transmitted out of the interface, including framing characters
ifHCOutUcastPkts: Displays the total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at the sub-layer, including those that were discarded or not sent.
ifHCOutMulticastPkts: Dispalys the total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.
ifHCOutBroadcastPkts: Displays the total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.
ifHCOutErrors: For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not be transmitted because of errors.
ip-mtu: Displays the IP MTU value of this interface.
line-protocol-exception-info: Displays the 'Exception information' of line protocol.
media-type: Displays the media type.
wavelength: Displays the wavelength of pluggable media.
if-description: Displays the textual string containing information about the interface.
queuing-strategy: Displays the 'Queuing strategy' for this interface.
fec-mode: Displays the current FEC mode of the interface. FEC mode can be FC-FEC, RS-FEC, or Disabled.
ifFecCorrectedBlocks: Displays the number of corrected Blocks. Displays Zero (0) when FEC is Disabled or is not supported.
ifFecUncorrectedBlocks: Displays the number of uncorrected Blocks. Displays Zero (0) when FEC is Disabled or is not supported.