/router/bgp/address-family/ipv6/unicast/{vrf-name}/neighbor/{ipv4-neighbor-address}/capability

Advertises Outbound Route Filter (ORF) capabilities to peer routers. You can configure this capability for TX, RX, or Both directions.

Usage

Default VRF:

 <routing-system xmlns="urn:brocade.com:mgmt:brocade-common-def">
    <router>
        <router-bgp xmlns="urn:brocade.com:mgmt:brocade-bgp">
            <address-family>
                <ipv6>
                    <ipv6-unicast>
                        <default-vrf>
                            <neighbor>
                                <af-ipv6u-ipv4-attr-holder>
                                    <af-ipv6u-ipv4-neighbor>
                                        <af-ipv4-neighbor-address>
                                            2.2.2.2
                                        </af-ipv4-neighbor-address>
                                        <af-neighbor-capability>
                                            <orf>
                                                <prefixlist>
                                                    <prefixlist-status/>
                                                    <prefixlist-send/>
                                                    <prefixlist-receive/>
                                                </prefixlist>
                                            </orf>
                                        </af-neighbor-capability>
                                    </af-ipv6u-ipv4-neighbor>
                                </af-ipv6u-ipv4-attr-holder>
                            </neighbor>
                        </default-vrf>
                    </ipv6-unicast>
                </ipv6>
            </address-family>
        </router-bgp>
    </router>
</routing-system>

User defined VRF:

 <routing-system xmlns="urn:brocade.com:mgmt:brocade-common-def">
    <router>
        <router-bgp xmlns="urn:brocade.com:mgmt:brocade-bgp">
            <address-family>
                <ipv6>
                    <ipv6-unicast>
                        <af-ipv6-vrf>
                            <af-ipv6-vrf-name>red</af-ipv6-vrf-name>
                            <neighbor>
                                <af-ipv6u-vrf-ipv4-attr-holder>
                                    <af-ipv6u-ipv4-neighbor>
                                        <af-ipv4-neighbor-address>
                                            2.2.2.2
                                        </af-ipv4-neighbor-address>
                                        <af-neighbor-capability>
                                            <orf>
                                                <prefixlist>
                                                    <prefixlist-status/>
                                                    <prefixlist-send/>
                                                    <prefixlist-receive/>
                                                </prefixlist>
                                            </orf>
                                        </af-neighbor-capability>
                                    </af-ipv6u-ipv4-neighbor>
                                </af-ipv6u-vrf-ipv4-attr-holder>
                            </neighbor>
                        </af-ipv6-vrf>
                    </ipv6-unicast>
                </ipv6>
            </address-family>
        </router-bgp>
    </router>
</routing-system>

Parameters

af-ipv4-neighbor-address

The IP address of the BGP peer through which the device can exchange IPv6 BGP routes over IPv4 session.

af-ipv6-vrf-name

The user defined VRF to use.

af-neighbor-capability

Sets the neighbour capability parameter.

orf

Configures the ORF capability.

prefixlist

Pass

prefixlist-send to enable ORF prefix list capability in the Send mode.
prefixlist-receive to enable ORF prefix list capability in the Receive mode.
Send both prefixlist-send and prefixlist-receive to enable in both modes.
Send prefixlist-status to view the current configuration.