The following example configures a switch to have one multinetted segment (port 5:5) that contains three subnets (192.168.34.0/24, 192.168.35.0/24, and 192.168.37.0/24).
Note
The secondary IP address of the super VLAN cannot be used for the sub VLAN IP address range.configure default delete port 5:5 create vlan multinet configure multinet ipaddress 192.168.34.1/24 configure multinet add secondary-ipaddress 192.168.35.1/24 configure multinet add secondary-ipaddress 192.168.37.1/24 configure multinet add port 5:5 enable ipforwarding
The following example configures a switch to have one multinetted segment (port 5:5) that contains three subnets (192.168.34.0, 192.168.35.0, and 192.168.37.0). It also configures a second multinetted segment consisting of two subnets (192.168.36.0 and 172.16.45.0). The second multinetted segment spans three ports (1:8, 2:9, and 3:10). RIP is enabled on both multinetted segments.
configure default delete port 5:5 create vlan multinet configure multinet ipaddress 192.168.34.1 configure multinet add secondary-ipaddress 192.168.35.1 configure multinet add secondary-ipaddress 192.168.37.1 configure multinet add port 5:5 configure default delete port 1:8, 2:9, 3:10 create vlan multinet_2 configure multinet_2 ipaddress 192.168.36.1 configure multinet_2 add secondary-ipaddress 172.16.45.1 configure multinet_2 add port 1:8, 2:9, 3:10 configure rip add vlan multinet configure rip add vlan multinet_2 enable rip enable ipforwarding