Onboard your switch with
ExtremeCloud™. Log in or create your XIQ administrator account in order to
select your switch operating system with XIQ at
https://extremecloudiq.com.
To perform the initial login and complete initial configuration tasks, follow these
steps.
-
Use a terminal emulator such as
PuTTY or TeraTerm to connect to the switch through the serial port connection.
You can also connect to the
switch via telnet or SSH. Be sure that your serial connection is set
properly:
- Baud rate: 115200
- Data bits: 8
- Stop bit: 1
-
Press [Enter] one or
more times until you see the login prompt.
-
At the login prompt, log in
using the default user name rwa.
When prompted for the password,
enter rwa.
When you are logged in with the role-based authentical level of rwa, you can
configure the login and password values for the other role-based
authentication levels.
