Non-Standard Ceiling Grid or Wall Installation

Details about non-standard ceiling grid or wall installation using optional bracket and accessory.

Note

Note

For all non-standard ceiling grid installation or wall installation instructions, refer to the Wi-Fi 6 802.11ax Access Points Accessories Guide.
The access point can be installed on a non-standard ceiling grid using the following accessories:
Order part number Description
AH-ACC-BKT-AX-TB Mounting bracket for Prelude ceilings (15/16 in. ceiling grid), Suprafine ceilings (9/16 in. ceiling grid), and walls
Click to expand in new window
Circular plastic bracket with two metal hinges for 15/16 in. ceiling installation.
AH-ACC-BKT-AX-IL Mounting bracket for Interlude (9/16 wide T-bar with protrusion) ceilings
Click to expand in new window
Circular plastic bracket with two metal hinges on either side. The bracket has an image of a 9/16 in ceiling grid printed on it.
AH-ACC-BKT-AX-SL Mounting bracket for Silhouette ceilings (ceiling grid with 1/8 in. or 1/4 in. bottom opening)
Click to expand in new window
Circular plastic bracket with two metal hinges on either side. The bracket has an image of a 1/4 in ceiling grid printed on it.
ACC-BKT-AX-JB Junction box or wall mounting for indoor access points
Click to expand in new window
Metal wall part in the background and a circular plastic part in the foreground.
ACC-BKT-AX-BEAM Beam mounting for indoor access points
Click to expand in new window
Plastic circular bracket with metal beam clip attached to one side of it.
AH-ACC-BKT-AX-WL Mounting bracket for direct-to-wall installations
Click to expand in new window
Plastic circular bracket with a center pointer to hold the access point in place.
Important

Important

The default bracket for wall installation is the ACC-BKT-AX-JB bracket.
Note

Note

Order the -JB bracket for new wall installations. The AH-ACC-BKT-AX-WL bracket is for users who already have the -WL brackets.
9036889-02 Rev AA