WS-AP3825 LED Indicators
Both models of the WS-AP3825 have four LED indicators, shown in WS-AP3825 LEDs (Front, lower right) below. The LEDs provide status information, described in Table 1-1, on the current state of the WS-AP3825. For more information, see the ExtremeWireless User Guide.
WS-AP3825 LEDs (Front, lower right)
1 | AP status | 4 | Radio 2 status (2.4 GHz) |
2 | LAN 1 (Ethernet 1) link state | 5 | Radio 1 status (5 GHz) |
3 | LAN 2 (Ethernet 2) link state |
LED | Status | Description |
---|---|---|
1 (AP status) | On Green | Indicates the WS-AP3825 is working normally. |
Flashing Green | Indicates:
|
|
On Amber | Indicates a CPU/system failure. | |
2 (Ethernet link state) LAN 1 | On Green | Indicates a valid 100Mbps Ethernet link. |
On Amber | Indicates a valid 1Gbps Ethernet link. | |
Off | Indicates the link is down. | |
3 (Ethernet link state) LAN 2 | On Green | Indicates a valid 100Mbps Ethernet link. |
On Amber | Indicates a valid 1Gbps Ethernet link. | |
Off | Indicates the link is down. | |
4 (Radio 2 status) | On Green | Indicates Radio 2 is enabled. |
Off | Indicates Radio 2 is not on. | |
5 (Radio 1 status) | On Green | Indicates Radio 1 is enabled. |
Off | Indicates Radio 1 is not on. |