Mounting to a Suspended/Drop Ceiling
To mount the AP3915i access point to a suspended or drop ceiling,
you need to use the Multi T-bar bracket.
-
Remove the ceiling panels around the drop ceiling
T-bar rail.
-
Open the movable sliding part of the T-bar to give the stationary and slider
T-bar more space.
Installing the T-bar adaptor
-
Hook the stationary end of the T-bar bracket onto the T-bar.
-
Tilt the T-bar up slightly in such a way that you are holding the stationary
and movable sides of the bracket. 4 Squeeze the bracket parts together until you
hear the T-bar locking tab click into place.
-
Slide the T-bar ceiling mount bracket base into the back of the access point.
The locking tab fits into a groove in the outside of the AP.
Mounting the AP3915i to the T-bar
-
Hold the AP and rock it back and forth to ensure that it is securely
mounted.
-
Attach the Ethernet cable‘s RJ45 connector to the LAN1/GE1 port and place the
ceiling tile back in place.