AP4000 Features and Specifications

Features

The access point has the following hardware components:
Click to expand in new window
Click to expand in new window
AP4000 hardware components
Access point hardware components on the side
Callout Description
1 Eth1
2 Eth0/PoE+
3 Console port
4 USB port
5 Reset button
6 Security Kensington lock
The access point has the following features:
  • One multicolor LED status light

    For LED activity description, see Status LED Activity Description.

  • One light sensor located at the top of the device
  • Two Ethernet ports - Eth0 and Eth1
    Ethernet ports (Eth0 and Eth1) automatically negotiate half- and full-duplex connections with the connecting device.
    • Eth0: 100/1000/2500 Mbps auto-negotiation Ethernet port, RJ45, Power over Ethernet (PoE) at 802.3at
    • Eth1: 10/100/1000 Mbps auto-negotiation Ethernet port, RJ45

      These ports are auto-sensing and adjust to straight-through and crossover standard Cat5e or better Ethernet cables automatically. The access point receives power through an Ethernet connection to the Eth0 port from power sourcing equipment (PSE) that is compatible with the 802.3at and 802.3at standards.

  • One USB port

    Use the USB port to connect USB-based beacons such as iBeacon and Internet of Things (IoT) devices. Remove the screw that secures the protective cover to access the USB port.

  • One micro USB console port
    Through the console port, you can make a serial connection between your management system and the access point.
    Note

    Note

    When you connect to the device using the micro USB Console port, the management station from which you connect to the device must have a VT100 emulation program, such as Tera Term Pro (a free terminal emulator) or Hilgraeve HyperTerminal (provided with Windows operating systems from XP forward).
  • One reset button
  • One Kensington lock
    Tip

    Tip

    The best practice is to use Kensington locks for locking the device.

Temperature Specifications

Power Specifications

IEEE 802.3at PoE Power

For detailed specifications, refer to the AP4000 Data Sheet.

9037237-01 Rev AB