efa inventory device interface
set-link-error-disable
Configures port dampening
(link-error-disable) on the SLX interface. Minimizes excessive interface
flapping.
Syntax
efa inventory device
interface set-link-error-disable
[--ip
device-ip | --if-type eth | --if-name
if-list | --toggle-threshold
value |
--sampling-time
value |
--wait-time value
]
Parameters
- --ip
device-ip
- Specifies a comma-separated
range of device IP addresses. For example:
10.1.1.13,10.1.1.50,10.1.1.101.
- --if-type eth
- Specifies that the interface
type is Ethernet, which is the default setting.
- --if-name
if-list
- Specifies a comma-separated
list of interface names. For example: 0/50-52,0/45,0/5:4,0/5:1-2.
- --toggle-threshold
value
- Valid values are 1 through
50.
- --sampling-time
value
- Valid values in seconds, are
1 through 65565. The default is 1.
- --wait-time
value
- Valid values, in seconds, are
0 through 65565.
Usage Guidelines
The configuration you set is persisted in the XCO database.
DRC and idempotency are supported.
Examples
efa inventory device interface set-link-error-disable –-ip 10.20.246.10
--if-type eth –-if-name 0/20 –-toggle-threshold 10 –-sampling-time 20
–-wait-time 10
