Displays configuration information for one or more interfaces in the current VR context.
vlan_name | Specifies an IPv6 configured VLAN. |
tunnel_name | Specifies an IPv6 tunnel. |
N/A.
The following example displays configuration information on a VLAN "accounting":
# show ipconfig ipv6 accounting Router Interface on accounting is enabled. MTU: 1500 IPv6 Hop Limit: 64 Locally registered unicast addresses: 2002::1/64 (Tentative) fe80::204:96ff:fe1e:ec00%accounting/64 (Tentative) Flags: IPv6 Forwarding: NO Accept recvd RA: NO Send redirects: YES Accept redirects: NO
The configuration settings for static route ping protection enable/disable, interval, and misses also appear:
# show ipconfig ipv6 Route Sharing : Enabled Route Compression : Enabled ICMP Redirect for Fast Path : Disabled Max Shared Gateways : Current: 16 Configured: 16 Route Sharing Hash : CRC Lower Ping Protection : Enabled for static routes Interval: 2 Misses: 3
This command was first available in ExtremeXOS 11.2.
This command changed to display information for the current VR context in ExtremeXOS 12.5.
The show output for max-gateways was added in ExtremeXOS 15.3.
Configuration settings for static route ping protection enable/disable, interval, and misses added in ExtremeXOS 16.1.3-Patch1-7.
This command is available on the platforms listed for the IPv6 unicast routing feature.