This appendix lists the specifications for the ExtremeWireless™ Indoor Access Point AP3912i.
Specifications for the AP3912i
| Item | Specification |
|---|---|
| AP Part Number: 31025 | WS-AP3912i-FCC |
| AP Part Number: 31026 | WS-AP3912i-ROW |
| Enclosure material | AP enclosure is not plenum rated. |
| Power source |
Power is provided by Power-over-Ethernet (802.3at or 802.3af). No AC power supply is needed. If wall plate has more than two Ethernet ports, the extra ports are not accessible after installing the Wall Plate AP. |
| Power consumption |
PoE (Power over Ethernet) 802.3at or PoE 802.3af Sensor radio power budget is 802.1af (12.5W) |
| Antenna | Four single band internal antennas |
| Uplink interface | One 10/100/1000BT Ethernet port |
| RoHS compliant | Yes |
| Radio configuration |
Dual Band Dual Concurrent 802.11ac and 802.11n Radio 1: 5 GHz; 2x2:2; IEEE 802.11 ac (up to 886 Mbps per radio) Radio 2: 2.4 GHz; 2x2:2; IEEE 802.11n (up to 300 Mbps per radio) Legacy 802.11abg mode support Integrated sensor radio that operates as Bluetooth 4.0 radio or operates as 802.15.4 (one at a time) |
| Water/dust proof ratings | Not applicable |
| Operating temperature | 0°C to 40°C |
| Non-operating transportation/storage | -40°C to 70°C (-40°F to 158°F) |
| Altitude (feet) | >6,500 feet; safety approved to 2,000 meters |
| Relative humidity (% RH) | 0% to 95% (non-condensing) |
| Wind | Not applicable. The AP3912i is an indoor-only model. |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB