Configure an NTP Address for the DHCP Server
Use this procedure to configure an NTP address for the DHCP Server to advertise to
clients.
Procedure
- In the navigation pane, expand .
- Select DHCP Server.
- Select the Global NTP tab.
- Select Insert.
- In IP Address, type the IPv4 address of the NTP server.
- Select Insert.
Global NTP Field Descriptions
Use the data in the following table to use the Global NTP tab.
| Name | Description |
|---|---|
|
IP Address |
Specifies the IPv4 address of the NTP server. You can enter a maximum of eight DNS servers. |
|
Origin |
Specifies the origin of DHCP Server configuration, either manually configured through CLI or EDM, or dynamically configured through RADIUS. |