XA1400 Series Technical Specifications

XA1440 switch

Height: 4.4 cm (1.73 in)

Width: 25 cm (9.84 in)

Length: 25.2 cm (9.92 in)

XA1480 switch

Height: 4.4 cm (1.73 in)

Width: 25 cm (9.84 in)

Length: 25.2 cm (9.92 in)

Two-post rack mount kit (separately orderable)

Height: 3.71 cm (1.46 in)

Width: 11.30 cm (4.45 in)

Length: 15.01 cm (5.91 in)

XA1440

Height: 19 cm (7.48 in)

Width: 32.4 cm (12.76 in)

Length: 34.7 cm (13.66 in)

XA1480

Height: 19 cm (7.48 in)

Width: 32.4 cm (12.76 in)

Length: 34.7 cm (13.66 in)

Two-post rack mount kit (separately orderable)

Height: 8.38 cm (3.3 in)

Width: 19.81cm (7.8 in)

Length: 28.57cm (11.25 in)

XA1440

3.1 kg (6.83 lb)

XA1480

3.1 kg (6.83 lb)

Two-post rack mount kit (separately orderable)

0.8 kg (1.76 lb)

XA1400 Series

12V DC power supply:

Part # XA1400-PWR-ADPT

DC Input: 12V, 5A for each PSU

DRAM

8G

8G

SSD

32GB

64GB

SEEPROM

16K bytes minimum for system ID (i2c connected)

16K bytes minimum for system ID (i2c connected)

North American Safety of ITE

UL 62368-1 2nd Ed., 2014-12-01, Listed Device (US)

UL 60950-1 2nd Ed., 2014-10-14, Listed Device (US)

CAN/CSA 22.2 #62368-1-14 2nd Ed., Canada

CAN/CSA 22.2 #60950-1-07 2nd Ed., Canada 2014-10

Complies with FCC 21 CFR Chapter 1, Sub-chapter J in accordance with FDA & CDRH requirements (US Laser Safety)

CDRH Letter of Approval (US FDA Approval)

European Safety of ITE

EN 62368-1:2014/A11:2017

EN 60950-1:2006 + A11:2009 + A1:2010+A12:2011 + A2:2013

EN 60825-1:2007, EN 60825-2:2004+A1+A2 or later (Lasers Safety)

2014/35/EU Low Voltage Directive

International Safety of ITE

CNS 14336-1

AS/NZX 60950-1 (Australia /New Zealand)

IEC 62368-1:2014/AA:2017

IEC 60950-1:2005 (2nd Ed.) + Am1:2009+ Am2:2013

GB 4943.1-2011

North America EMC for ITE

• FCC 47 CFR part 15 subpart B Class B (USA)
• ICES-003 (Canada)

European EMC standards

• IEC 61000-6-4:2007+A1:2011
• EN 61000-6-2:2005+AC:2005
• EN 55032:2015/AC:2016 Class B
• EN 55024:2010/A1:2015
• EN 55011:2009+A1:2010 Class B
• EN 61000-3-2:2014 Class B
• EN 61000-3-3:2013
• 2014/30/EU EMC Directive

International EMC certifications

• IEC 61000-4-2:2008 ED 2.0
• IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 ED 3.2
• IEC 61000-4-4:2012 ED 3.0
• IEC 61000-4-5:2014+AMD1:2017 ED 3.1
• IEC 61000-4-6:2013 ED 4.0
• IEC 61000-4-8:2009 ED 2.0
• IEC 61000-4-11:2004+AMD1:2017 ED 2.1
• IEC 61000-6-4:2018 ED 3.0
• AS/NZS CISPR32:2015 Class B
• CISPR11:2009 ED 5.0 Class B
• CISPR24:2010+AMD1:2015 ED 2.0 Class B
• CNS 13438-2006
• KN22, KN24
• GB/T9254-2008
• VCCI-CISPER 32:2016 Class B
• IEC 61000-6-2:2016 ED 3.0

Country-specific

• RCM (Australia)
• VCCI Class A (Japan)
• MSIP KCC (Korea)
• BSMI (Taiwan)
• ANATEL (Brazil)
• CCC mark (China)
• SABS, NRCS (South Africa)

EN/ETSI 300 386:2008 (EMC Telecommunications)

EN/ETSI 300 019 (Environmental for Telecommunications)

MEF9 and MEF14 certified for EPL, EVPL, and ELAN

IEEE 802.3

IEEE 802.3bz

IEEE 802.3at

IEEE 802.3bt

Environmental standards

EN/ETSI 300 019-2-1 v2.1.2 (2000 - 2009) - Class 1.2 Storage

EN/ETSI 300 019-2-2 v2.1.2 (1999 - 09) - Class 2.3 Transportation

EN/ETSI 300 019-2-3 v2.1.2 (2003 - 04) - Class 3.1e Operational

EN/ETSI 300 753 (1997-10) - Acoustic Noise

ASTM D3580 Random Vibration Unpackaged 1.5G

Temperature range

• 0°C to 40°C (32°F to 104°F) up to 2000m (6,561 ft)

Other operating conditions

Humidity: 10% to 90% relative humidity, non-condensing

Altitude: 0 to 2,000 meters (6,561 feet)

Operational shock (half sine): 30 m/s² (3 G), 11 ms, 60 shocks

Operational random vibration: 3 to 500 Hz at 1.5 G rms

Storage & transportation conditions (packaged)

Transportation temperature: -40°C to 70°C (-40°F to 158°F)

Humidity: 5% to 95% relative humidity, non-condensing

Packaged shock (half sine): 180 m/s² (18 G), 6 ms, 600 shocks

Packaged sine vibration: 5 to 62 Hz at velocity 5 mm/s,

62 to 500 Hz at 0.2 G

Packaged random vibration: 5 to 20 Hz at 1.0 ASD w/–3 dB/oct.

from 20 to 200 Hz

14 drops minimum on sides and corners at 42 in (<15 kg box)