Universal HW AP4xx*C Series
IntroductionNEW!
WiNG 7.6.2 supports various universal hardware (UAPs) AP4xx*C. These access points can be
deployed either as cloud access points or as on-prem access points. Universal access
points allows the access points to switch back and forth between the two modes.
When deployed as a cloud access point, it will work with
ExtremeCloud IQ (XIQ). When deployed as an on-prem access point, it can
work with either WiNG controller in distributed mode or XCC in campus
mode.
Note
UAPs out-of-box will search for adoption by XIQ. The access point
must be connected to networks with internet access and an XIQ
account.
List of support universal hardware access points:
- AP410C - Indoor access point with internal
omni-directional antennas
- AP460C - Outdoor access point with internal
omni-directional antennas
- AP460S6C - Outdoor access point with internal
directional 60-degree sector antennas
- AP460S12C - Outdoor access point with internal
directional 120-degree sector antennas
The following SKU models are supported:
- FCC for FCC domain
- WR for rest of the world outside of North America, excluding Israel and
Egypt
- CAN for Canada only
- EG for Egypt only
- IL for Israel only
The following features are not supported on UAPs:
- Virtual controller
- WiNG GUI on access points
- Standalone access points – CLI only
- PKI/CA certificate
- IoT Thread
- MCX in distributed mode
- ADSP
For more information, refer to the WiNG 7.6.2 release notes and the
respective universal hardware installation guide.
