description
Supported in the following platforms:
- Access points – AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP6522, AP6562, AP7161, AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622,
AP763, AP7662, AP8163, AP8543, AP8533.
- Service platforms – NX5500, NX7500,
NX9500, NX9600, VX9000
description [<LINE>|<WORD>]
Parameters
description [<LINE>|<WORD>]
| <LINE> |
Configures the
maximum length (number of characters) of the interface description |
| <WORD> |
Configures a
unique description for this interface. The description should not exceed the
length specified by the <LINE> parameter. |
Example
nx9500-6C8809(config-profile-testnx5500-if-ge1)#description “This is GigabitEthernet interface for Royal King”
nx9500-6C8809(config-profile-testnx5500-if-ge1)#show context
interface ge1
description "This is GigabitEthernet interface for Royal King"
ip dhcp trust
qos trust dscp
qos trust 802.1p
channel-group 1
nx9500-6C8809(config-profile-testnx5500-if-ge1)#
Related Commands
| no |
Removes the interface description |
