Connecting the Power Supply

If you need to power the AP-7632i with an external 12V DC power supply, you can plug the power cord into the power connector on the back of the AP.

Power is provided through the RJ45 Ethernet port (LAN1 port) of AP-7632i. This is the preferred method of powering the AP on ceiling and high wall installations.

The AP-7632i can also be powered by an external DC power supply. It is plugged into an AC source.

Note

There is no wall mount option for the 12V DC power supply option.

AP-7632i Power Supply Options

AP-7632i Port	Function
	LAN1/GE1 Port
	Optional 12V DC Power Supply

When the device is powered on, the power LED on the front face of the AP is lit.

Published October 2017prev | next