Installation Process

1. Verify the box contents.
2. Review the Safety Guidelines.
3. Mount the AP to a Flat Ceiling. Alternatively, you can also mount the AP to a junction/gang box, suspended/drop ceiling, or a beam.
   

   Note

   An optional Flat Metal Indoor Bracket can be purchased (ordering Part Number 37210) for easy installation to a flat ceiling/wall.

   

   Note

   The AP can also be mounted to a flat wall/ceiling using the WS-MBIWALL04 (ordering Part Number 30516) bracket.

   

   Note

   Mounting the AP to a suspended or drop ceiling requires the optional adapter (Universal Mounting Kit for EWLAN APs; purchasing part number KT-135628-01), which must be purchased separately.

   

   Note

   The optional WS-MBI-DCMTR01 (purchasing part #30518) adaptor can also be used for T-bar installations onto suspended/drop ceiling.

   

   Note

   To install the AP to a beam, attach a beam clip (Accessory BRKT-000147A-01) to the mounting bracket.
4. Connect the Power Supply to the AP7632 access point.