Mounting to a Beam
The AP-7632i can be installed to a beam by attaching the beam clip
accessory (Accessory BRKT-000147A-01) to the mounting bracket.
-
Attach the adapter to the mounting bracket by
using a twisting motion.
-
Attach the mounting bracket to the AP.
-
Place the adapter on a beam in such a way that there is enough space between
the screw and clamp to be tightened.
-
Use the screw and clamp on the top of the adapter to secure the AP in place on
the beam.
-
Insert the Ethernet plug into the AP.