NX-7500 Series Integrated Services Platform SFP Installation

The NX-7500 series integrated services platform supports use of SFP transceivers.

Note

SPF transceivers are keyed so that they can only be installed with the correct orientation.

To install a SFP transceiver:

1. Insert the SFP into the integrated services platform with the optical connector facing out and the slot connector facing down.
   

   
2. Press the transceiver into the slot until it clicks into place.
   

   Note

   Only install 10Gb SPF+ transceivers in 10Gb NMC modules and 1Gb SPF transceivers in 1Gb NMC modules.