efa inventory device snmp user
create
Creates an SNMP user and SNMP
group.
efa inventory device snmp
user create
[--ip
device-ip | --name
community | --group
group | --enable-read-access |
--enable-write-access | --enable-notify-access | --auth-protocol
md5
|
sha | --auth-passphrase
authphrase | --priv-protocol
AES128
|
DES | --priv-passphrase
privphrase |
--help]
- --ip
device-ip
- Specifies a comma-separated
range of device IP addresses. Example: 1.1.1.1-3,1.1.1.2,2.2.2.2.
- --name
community
- Specifies an SNMP community
name.
- --group
group
- Specifies an SNMP group
name.
- --enable-read-access
- Specifies read access for the
view.
- --enable-write-access
- Specifies write access for the view.
- --enable-notify-access
- Specifies notify access for the view.
- --auth-protocol
md5
|
sha
- Specifies notify access for
the view. This parameter is set to off by default.
- --auth-passphrase
passphrase
- Authentication password.
- --priv-protocol
AES128
|
DES
- Privacy protocol.
- --priv-passphrase
privphrase
- Privacy password.
The command creates an SNMP user along with an SNMP group. This command is valid for
SNMP v3 version only.
SLX stores the auth-passphrase
and priv-passphrase
in
encrypted format. By default, EFA encrypts all passwords.
EFA internally creates the v3 group and manages the user to group mapping. The group
is created with the first user associated with the group.
The SNMP group is automatically deleted when the last SNMP community associated with
the group is removed. If you want to edit SNMP group attributes, all the
corresponding users must be deleted and created with modified group settings.
efa inventory device snmp user create –-ip 10.20.246.10 –-name tempv3user –-group tempv3group
–-enable-read-access –-enable-write-access -–enable-notify-access –-auth-protocol md5
–-auth-passphrase tempv3passwd --priv-protocol AES128 –-priv-passphrase tempv3priv