Creates a BGP peer for a specified VRF.
device-ip,vrf-name:ipv4-listen-range,peer-group-name,listen-limit
.
For example: 10.x.x.x,red:11::22/127
. The listen-limit
value is optional.device-ip,vrf-name:ipv4-neighbor,remote-as
. For example:
10.x.x.x,red:10.20.30.40,5000
.device-ip,vrf-name:ipv4-neighbor,bfd-enable(true/false),bfd-interval,bfd-min-rx,bfd-multiplier
.
For example: 10.x.x.x,red:10.20.30.40,true,100,200,5
. device-ip,vrf-name:ipv4-neighbor,next-hop-self(true/false/always)
.
For example: 10.x.x.x,red:10.y.y.y,true
.device-ip,vrf-name:ipv4-neighbor,update-source-ip
. For
example: 10.x.x.x,red:10.y.y.y,11.x.x.x
.device-ip,vrf-name:ipv6-listen-range,peer-group-name,listen-limit
.
The listen-limit
value is optional.device-ip,vrf-name:ipv6-neighbor,remote-as
. For example:
10.x.x.x,red:10::40,5000
. device-ip,vrf-name:ipv6-neighbor,bfd-enable(true/false),bfd-interval,bfd-min-rx,bfd-multiplier
.
For example: 10.x.x.x,red:10::40,true,100,200,5
. IPv4 Unicast Neighbor md5-password, in the format device-ip,vrf-name:ipv4-neighbor,ipv4-md5-password
.
Example for encrypted/password containing special characters:
--ipv4-uc-nbr-md5-password
device-ip,vrf-name:ipv4-neighbor,'$9$MCgKGaNt6OASX68/7TC6Lw=='
IPv6 Unicast Neighbor md5-password, in the format
device-ip,vrf-name:ipv6-neighbor,ipv6-md5-password
.
Example for encrypted/password containing special characters:
--ipv6-uc-nbr-md5-password
device-ip,vrf-name:ipv6-neighbor,'$9$MCgKGaNt6OASX68/7TC6Lw=='
device-ip,vrf-name:ipv6-neighbor,next-hop-self(true/false/always)
.
For example: 10.x.x.x,red:10::40,true
.device-ip,vrf-name:ipv6-neighbor,update-source-ip
. For
example: 10.x.x.x,red:10::40,11::22
.false
.(efa:extreme)extreme@node-1:~$ efa tenant service bgp peer create --name B1 --tenant tenant11 --ipv4-uc-nbr 10.20.216.16,blue11:1.1.1.11,95001 --ipv4-uc-nbr-bfd 10.20.216.16,blue11:1.1.1.11,true,50,5000,50 --ipv4-uc-nbr-next-hop-self 10.20.216.16,blue11:1.1.1.11,always --ipv4-uc-nbr-update-source-ip 10.20.216.16,blue11:1.1.1.11,10.11.12.13 --ipv6-uc-nbr 10.20.216.16,blue11:20a1:a::10,95001 --ipv6-uc-nbr-bfd 10.20.216.16,blue11:20a1:a::10,true,50,5000,50 --ipv6-uc-nbr-next-hop-self 10.20.216.16,blue11:20a1:a::10,always --ipv6-uc-nbr-update-source-ip 10.20.216.16,blue11:20a1:a::10,20::10 BgpService created successfully. --- Time Elapsed: 4.144354035s ---The following examples create a dynamic BGP peer (IPv4/IPv6).
(efa:extreme)extreme@node-1:~$ efa tenant service bgp peer create --name B2 --tenant tenant11 --ipv6-uc-dyn-nbr 10.20.216.16,blue11:15::/127,pg1,10 --ipv4-uc-dyn-nbr 10.20.216.16,blue11:15.15.15.0/28,pg1,10 BgpService created successfully. --- Time Elapsed: 1.852356132s ---The following example creates a BGP peer md5-password in a secure manner.
For the complete procedure, see the topic "Configure BGP MD5 Authentication for Tenant BGP Peer and Peer-group Securely" topic in the ExtremeFabric Security Guide.
efa tenant service bgp peer create --name bgp173-2501 --tenant tenant11 --ipv4-uc-nbr 10.20.246.6,v1:25.1.1.3,5901 --ipv4-uc-nbr-bfd 10.20.246.6,v1:25.1.1.3,true --ipv6-uc-nbr 10.20.246.5,v1:25:1::3,5901 --ipv6-uc-nbr-bfd 10.20.246.5,v1:25:1::3,true --md5-password-prompt-enable=true