Displays the running-config of all current EFA configurations.
Run this command to display the running-config of current configurations for core services.
The output is displayed in the following order: Asset, Fabric, Tenant commands.
The command output contains the default values for each configuration line item.
You can use the command output for CLI playback on an empty EFA deployment. The output is a useful tool for recovery.
This example shows a partial list of typical output.
$ efa show-running-config efa inventory device register --ip "10.24.80.191" --username admin --password password efa inventory device setting update --ip "10.24.80.191" --maint-mode-enable-on-reboot No --maint-mode-enable No --health-check-enable No --health-check-interval 6m --health-check-heartbeat-miss-threshold 2 --config-backup-periodic-enable Yes --config-backup-interval 24h --number-of-config-backups 4 efa inventory device register --ip "10.24.80.192" --username admin --password password efa inventory device setting update --ip "10.24.80.192" --maint-mode-enable-on-reboot No --maint-mode-enable No --health-check-enable No --health-check-interval 6m --health-check-heartbeat-miss-threshold 2 --config-backup-periodic-enable Yes --config-backup-interval 24h --number-of-config-backups 4 efa fabric create --name "default" --type clos --stage 3 --description "Default Fabric"