efa tenant service bgp peer-group create

Creates a BGP peer group for the specified tenant.

Syntax

efa tenant service bgp peer-group create [ --name peer-group-name |--tenant tenant-name | --pg-asn string |--pg-bfd string |--pg-bfd-enable string | --pg-remove-private-as stringArray | --pg-name string | --pg-next-hop-self string | --pg-update-source-ip string | --pg-md5-password string | --pg-md5-password-prompt-enable true | false | --description string]

Parameters

--name peer-group-name
Specifies the name of the BGP peer group instance.
--tenant tenant-name
Specifies the name of the tenant.
--pg-asn string
Specifies the ASN of the BGP peer group with a string in the following format: device-ip:peer-group-name,remote-asn.
--pg-bfd string
Specifies the BFD properties of the BGP peer group with a string in the following format: device-ip: peer-group-name,bfd-enable(true/false),interval,bfd-min-rx,bfd-multiplier.
--pg-bfd-enable string
Turns on BGP peer group with a string in the following format: device-ip,peer-group-name:md5-password.
--pg-name string
Specifies the BGP peer group name with a string in the following format: device-ip:peer-group-name.
--pg-remove-private-as stringArray
Turns the remove-private-as setting on or off per BGP peer group, created for external connectivity, in the following format: device-ip,pg-name:true|false. For example: 10.20.246.16,pg1:true.
By default, the setting is off.
--pg-next-hop-self string
Specifies the next-hop-self for the BGP peer group with a string in the following format: device-ip:peer-group-name,next-hop-self(true/false/always).
--pg-update-source-ip string
Updates the source IP address of the BGP peer group with a string in the following format: device-ip:peer-group-name,update-source-ip.
--pg-md5-password string
Indicates the MD5 password.
Important

Important

BGP MD5 authentication for tenant dynamic peers is not supported.
--pg-md5-password-prompt-enable true | false
Turns on secure input for the MD5 password. The default is false.
Important

Important

BGP MD5 authentication for tenant dynamic peers is not supported.
--description string
Describes the BGP peer group.

Examples

This example creates a peer group instance.
$ efa tenant service bgp peer-group create --name ten1bgppg1 
--tenant ten1 --pg-name 10.20.246.15:pg1 --pg-asn 10.20.246.15,pg1:55001 
--pg-bfd-enable 10.20.246.15,pg1:true 
--pg-remove-private-as 10.20.246.15,pg1:true --pg-name 10.20.246.16:pg1 
--pg-asn 10.20.246.16,pg1:55001 --pg-bfd-enable 10.20.246.16,pg1:true 
--pg-remove-private-as 10.20.246.16,pg1:true
This example creates a BGP peer-group MD5 password in a secure manner. For more information, see the "Configure BGP MD5 Authentication for Tenant BGP Peer and Peer-group Securely" topic in the Extreme Fabric Automation Security Guide, 2.7.0 .
$ efa tenant service bgp peer-group create --tenant "tenant11" 
--name "v1-PeerGrp" --pg-name 10.20.246.5:v1-PeerGrp --pg-asn 10.20.246.5,v1-PeerGrp:5200 
--pg-bfd-enable 10.20.246.5,v1-PeerGrp:true --pg-name 10.20.246.5:v3-PeerGrp 
--pg-asn 10.20.246.5,v3-PeerGrp:5201 --pg-bfd-enable 10.20.246.5,v3-PeerGrp:true 
--pg-name 10.20.246.6:v1-PeerGrp --pg-asn 10.20.246.6,v1-PeerGrp:5200 
--pg-bfd-enable 10.20.246.6,v1-PeerGrp:true --pg-md5-password-prompt-enable=true