efa inventory device interface set-breakout

Breaks a port into multiple interfaces, such as breaking one 40G port into four 10G ports.

Syntax

efa inventory device interface set-breakout [--ip device-ip | --if-type eth | --if-name if-list | --mode 1x10g | 1x25g | 1x40g | 1x100g | 2x40g | 2x50g | 4x10g | 4x25g ]

Parameters

--ip device-ip: Specifies a comma-separated list of device IP addresses. For example: 1.1.1.1-3,1.1.1.2,2.2.2.2.
--if-type eth: Specifies that the interface type is Ethernet, which is the default setting.
--if-name if-list: Specifies a comma-separated list of interface names. For example: 0/50-52,0/45.
--mode 1x10g | 1x25g | 1x40g | 1x100g | 2x40g | 2x50g | 4x10g | 4x25g: Configures breakout mode for the ports.

Usage Guidelines

In SLX-OS, you can use the show running-config hardware command to see whether breakout mode is configured for a device.

The new breakout interfaces you create are identified by the name of the original interface followed by a suffix.

The configuration you set is persisted.

DRC and idempotency are supported.

Examples

This example breaks three interfaces into four ports each.

efa inventory device interface set-breakout --ip 10.24.80.158
+--------------+----+-------+----------------+---------+
|   DeviceIP   | ID | Name  | Interface Type | Result  |
+--------------+----+-------+----------------+---------+
| 10.24.80.158 | 73 | 0/2:2 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 72 | 0/1:4 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 74 | 0/3:2 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 78 | 0/3:3 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 75 | 0/3:4 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 70 | 0/1:1 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 71 | 0/1:3 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 80 | 0/2:1 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 79 | 0/1:2 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 76 | 0/2:3 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 69 | 0/3:1 | ethernet       | Success |
+              +----+-------+----------------+---------+
|              | 77 | 0/2:4 | ethernet       | Success |
+--------------+----+-------+----------------+---------+
Interface Details
--- Time Elapsed: 48.3801684s ---

This example attempts to break out ports on two devices, but one IP address is invalid.

efa inventory device interface set-breakout 
--ip 10.24.80.158,10.10.10
+--------------+----+-------+----------------+---------+-----------------+
|   DeviceIP   | ID | Name  | Interface Type | Result  |    Reason        
+--------------+----+-------+----------------+---------+------------------
| 10.10.10.10  |    |       |                | Failed  | Device does not  
|              |    |       |                |         | exist with IP: 
                                                         10.10.10.10
+--------------+----+-------+----------------+---------+------------------
| 10.24.80.158 | 94 | 0/8:3 | ethernet       | Success |                  
+              +----+-------+----------------+---------+------------------
|              | 91 | 0/9:3 | ethernet       | Success |                  
+              +----+-------+----------------+---------+------------------
|              | 83 | 0/9:4 | ethernet       | Success |                  
+              +----+-------+----------------+---------+------------------
|              | 86 | 0/6:3 | ethernet       | Success |                  

Interface Details
--- Time Elapsed: 59.3971958s ---

This example breaks out ports on multiple devices.

efa inventory device interface set-breakout 
--ip 10.24.80.158,10.24.80
+--------------+-----+--------+----------------+---------+-------------------------+
|   DeviceIP   | ID  |  Name  | Interface Type | Result  |        Reason           |
+--------------+-----+--------+----------------+---------+-------------------------+
| 10.24.80.158 | 0   | 0/9    | ethernet       | Failed  | Interface [0/9] from the 
|              |     |        |                |         | range [0/9-12] does not 
|              |     |        |                |         | exist or port is already 
|              |     |        |                |         | breakout for device  
                                                           IP 10.24.80.158. Specify
                                                           a valid interface.     
+              +-----+--------+----------------+---------+-------------------------+
|              | 105 | 0/10:2 | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 108 | 0/12:2 | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 102 | 0/12:3 | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 104 | 0/11:4 | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 97  | 0/12:4 | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 106 | 0/10:4 | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 98  | 0/11:2 | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 100 | 0/11:3 | ethernet       | Success |                         |
+--------------+-----+--------+----------------+---------+-------------------------+
| 10.24.80.159 | 120 | 0/10:1 | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 114 | 0/9:4  | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 118 | 0/10:3 | ethernet       | Success |                         |
+              +-----+--------+----------------+---------+-------------------------+
|              | 115 | 0/12:2 | ethernet       | Success |                         |
+--------------+-----+--------+----------------+---------+-------------------------+
Interface Details
--- Time Elapsed: 1m16.6280022s ---

This example configures break out for the specified fabric name.

efa inventory device interface set-breakout --if-name 0/19-20 
--mode 4x25g --fabric fabric1
+--------------+-----+--------+----------------+---------+--------+
|   DeviceIP   | ID  |  Name  | Interface Type | Result  | Reason |
+--------------+-----+--------+----------------+---------+--------+
| 10.24.80.158 | 188 | 0/20:2 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 184 | 0/20:3 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 190 | 0/20:4 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 191 | 0/19:1 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 187 | 0/19:2 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 189 | 0/19:3 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 185 | 0/19:4 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 186 | 0/20:1 | ethernet       | Success |        |
+--------------+-----+--------+----------------+---------+--------+
| 10.24.80.159 | 196 | 0/19:2 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 194 | 0/19:3 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 197 | 0/19:4 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 199 | 0/20:1 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 193 | 0/20:2 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 195 | 0/20:3 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 192 | 0/20:4 | ethernet       | Success |        |
+              +-----+--------+----------------+---------+--------+
|              | 198 | 0/19:1 | ethernet       | Success |        |
+--------------+-----+--------+----------------+---------+--------+
Interface Details
--- Time Elapsed: 1m6.2210288s ---